User's Manual
Table Of Contents
- Copyright and disclaimer
- Package contents
- Introduction
- Installation
- Operations
- BenQ Launcher
- Connections
- Navigating the Settings menu
- Maintenance
- Troubleshooting
- Specifications
50
Wireless Connections
Connecting the projector to a Wi-Fi network
Before you can project wirelessly via the projector you must first connect the projector to a Wi-Fi network. To connect your projector to a Wi-Fi
network, or to switch Wi-Fi networks:
1. Power on the projector (see Starting up the projector on page 35).
2. On the home page of the BenQ Launcher interface, select Wi-Fi Settings and press OK to access the Wi-Fi settings.
If you have already connected the projector to a Wi-Fi network during the setup wizard you may skip the steps in this section.