User's Manual

77
Deactivating the Bluetooth speaker or headphones
To deactivate Bluetooth on the projector so that it no longer outputs its audio to a separate speaker or headphones:
1. Press the down arrow key on the remote control to navigate to the settings menus.
2. Select Bluetooth and press OK.
3. Select Bluetooth and press OK disable Bluetooth.
Using the Projector as a Bluetooth speaker
To connect a mobile device to the projector and use the projector as a Bluetooth speaker:
1. Press the switch mode key on the projector, a screen will be shown by the projector indicating that it is switching to Bluetooth mode.
2. The projector lamp on the projector will shut off and the switch mode LED indicator will begin flashing blue.
3. Enable Bluetooth on your mobile device.
4. Select the BenQ GV1 device name from the list of available devices on your mobile device.
5. Once your mobile device has successfully paired and connected to the projector the projector will play a connection sound and the switch mode
LED indicator will light up solid blue.
Once you have successfully paired your mobile device with the projector, pairing information will be stored on both devices and a connection will
automatically be made when Bluetooth is enabled on both devices and both devices are within range of each other.