Operation Manual

19 Assembling your monitor with a height adjustment stand

Rotate the turntable on the bottom of the monitor base

until you see the thumbscrew ( ).

Tighten the thumbscrew on the bottom of the monitor

base as illustrated ( ).

To secure or release a screw, a screwdriver or a coin is

required.

Gently attempt to pull them back apart to check that

they have properly engaged.

Carefully lift the monitor, turn it over and place it

upright on its stand on a flat even surface.

Extend the monitor to the maximum extended position.

Then tilt the monitor. And rotate the monitor 90

degrees counterclockwise as illustrated.

You might want to adjust the monitor stand height. See

Adjusting the monitor height on page 22 for more

information.