Copyright Copyright © 2002 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 0.6 inches (1.5cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.6 inches (1.5cm) must be maintained between the user's body and the back of the phone, including the antenna, whether extended or retracted. Third-party belt-clips, holsters and similar accessories containing metallic components shall not be used.
Antenna careThe design of your phone complies with the FCC guidelines (and those standards). Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. Phone operation NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder. Driving TIPS ON EFFICIENT OPERATION: For your phone to operate most efficiently: • Extend your antenna fully.
held wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers: • Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON; • Should not carry the phone in a breast pocket; • Should use the ear opposite the pacemaker to minimize the potential for interference.
Aircraft FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft. To avoid interfering with blasting operations, turn your phone OFF when in a "blasting area" or in areas posted: "Turn off two-way radio". Obey all signs and instructions. Blasting areas Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions.
FDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is known--and what remains unknown--about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This information may be used to respond to questions. Why the concern? Mobile phones emit low levels of radio frequency energy (i.e., radio frequency radiation) in the microwave range while being used.
Briefly, there is not enough evidence to know for sure, either way; however, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods. Animal experiments investigating the effects of RF exposures characteristic of mobile phones have yielded conflicting results.
Institute is expected to bear on the accuracy and repeatability of these results.1 Researchers conducted a large battery of laboratory tests to assess the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of abnormalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural changes in the genetic material of blood cells called lymphocytes.
where the mobile phone was used. Because this occurred in only a small number of cases, the increased likelihood was too small to be statistically significant.4 In summary, we do not have enough information at this point to assure the public that there are, or are not, any low incident health problems associated with use of mobile phones.
health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data does not justify FDA regulatory actions at this time, FDA has urged the mobile phone industry to take a number of steps to assure public safety.
level drops off dramatically with distance. For example, they could switch to: • • • a mobile phone in which the antenna is located outside the vehicle, a hand-held phone with a built-in antenna connected to a different antenna mounted on the outside of the car or built into a separate package, or a headset with a remote antenna to a mobile phone carried at the waist. Again, the scientific data does not demonstrate that mobile phones are harmful.
4. Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of License note cellular telephones and the risk for brain tumors: a case-control study. Int. J. Oncol., 15: 113-116, 1999.
Table of Cotents Chapter 0: Quick Start ........................................ 1 Chapter 1: Introduction to Your Phone ............ 5 Your Phone ........................................................................6 Appearance ........................................................................7 Chapter 2: Using Your Phone ............................. 15 Basic Operations ..............................................................16 Turning on the phone ..........................................
Table of Cotents Call Logs Menu ..................................................................28 Call logs ........................................................................................... 28 Messages Menu .................................................................29 Inbox ................................................................................................ 29 Compose ........................................................................................ 29 Outbox ..........
Table of Cotents Language .......................................................................................... 47 Answer By ...................................................................................... 48 Auto Redial .................................................................................... 48 Restore Default Value ................................................................. 49 Call Srvcs Menu ................................................................50 Limit Alert .....
Table of Cotents " #
Chapter 0: Quick Start
BenQ C600 Mobile Phone Please follow the simple steps below to make your first call: Install the battery Place the bottom end of the battery on the phone, then press down the top side of the battery. You will hear a click when the battery is secured. .Remove the battery Press the battery latch and the battery rises automatically. Then, lift the battery off the compartment as illustrated below. Charge the battery Insert the battery charger connector into the battery charging socket.
BenQ C600 Mobile Phone PU SH Turn the phone on After the battery is fully charged, press and hold key to turn on the phone power. The phone beeps and a welcome animation will be displayed on the screen. After the phone is turned on, it will start searching the network to use.
BenQ C600 Mobile Phone
Chapter 1: Introduction to Your Phone
BenQ C600 Mobile Phone Your Phone Thank you for choosing BenQ mobile phone! From now on, with your mobile phone, you will experience total mobility in your life. You will be able to communicate with more freedom and convenience. We know that you demand more than what a mobile phone can offer for mobility. The light-weight, slim body of your phone symbolizes your taste for elegance and compactness. The high-resolution LCD display frees you from the nightmare of groping between pixels.
BenQ C600 Mobile Phone Appearance Front View Rear View (With battery removed)
BenQ C600 Mobile Phone Bottom View &
BenQ C600 Mobile Phone LCD Screen 2002-09-10 Fri 11:50 Menu There are several icons that appear on the LCD screen to indicate the status of your phone. Please see the table below for the meaning of each icon: Book Icon Meaning Signal strength Shows current signal strength. The more bars displayed, the better the signal strength. Message Steady: Indicates that there are new and unread text or voice messages. Blinking: Indicates that there are new unread urgent messages.
BenQ C600 Mobile Phone Displays the ring type when your phone receives an incoming call: : the phone generates a ring tone when there is an incoming call. Ring type : indicates that the phone is in silent mode and the phone vibrates when there is an incoming call. :the phone rings and vibrates when there is an incoming call.
BenQ C600 Mobile Phone Keypad There are two kinds of keys on the keypad: Function Keys and Alphanumeric Keys. In each section below, "long press" a key means "press and hold a key for about 2 seconds", while "press" a key means "press and release a key immediately". In standby mode, when you press a key on the keypad, the backlight will be turned on automatically. If you want to turn off the backlight, please refer to “Backlight” on page 47 for details. Function Keys Press... To...
BenQ C600 Mobile Phone Alphanumeric Keys There are 12 alphanumeric keys on the keypad. You can use these keys to enter numbers and letters. To enter a number, simply press the button with that number. To enter characters, press the key several times until the desired letter appears. To switch between upper and lower cases, press the key. On the other hand, to switch between numbers and letters, press the “Option” key.
BenQ C600 Mobile Phone Key Operations In standby mode: Key Press Long Press Right softkey Phonebook None Left softkey Menu None Send Outgoing call logs Redial Last Number End None Power Off Up Qkey List Down List records None phonebook None Clear None List Audio Profiles * * None # # Wap 1~9 1~9 Speed dialing 0 0 Call to voice mail In Main Menu: Key Right softkey Press Right softkey Long Press None Left softkey Left softkey None Send None None End Back to standby
BenQ C600 Mobile Phone Inputting data Your phone provides two input methods for you to input various data into your phone using the keys on the keypad. You can select the desired one in the settings menu. Multi-tap Text input method When you have entered the first letter, the cursor will advance to the position of the next letter after about two seconds. You can also type to enter the next letter directly. To clear a letter or number, press key. The cursor will move backward and the letter will be deleted.
Chapter 2: Using Your Phone
BenQ C600 Mobile Phone Basic Operations Turning on the phone When the phone power is off, you can long press key to turn it on. The phone beeps with a piece of music and a welcome animation will appear on the screen. After the phone is turned on, it will start searching for the network to use. When network service is acquired, the banner will be displayed on the screen. Under this "standby" mode, you can: • Make a call. • Press the “Menu” soft key to access Main Menu.
BenQ C600 Mobile Phone • From "Incoming Call" log, choose a number to dial and press key. • From "Missed Call" log, choose a number to dial and press key. Time pause When you enter a phone number, you can press the key to insert a time pause. T (time pause) will appear on the screen. If a time pause is inserted, the phone will send the numbers after the time pause after 3 seconds. This is useful when you want to call an extension number.
BenQ C600 Mobile Phone Redialing a call If the attempt to make a call has failed, according to the setting in Retry Mode, you can redial the last dialed number manually or let the phone redial the number automatically. Answering a call The phone rings or vibrates when a call is received. If the caller's number can be found in the Phone Book, the caller's name will appear on the screen. The call time will also be shown. You can press key to answer that call.
BenQ C600 Mobile Phone Phone Book: Enter Phone Book (see “Phone Book Menu” on page 25). Scheduler: Access Scheduler (see “Scheduler” on page 39). Scratch Pad: Use the built-in Scratch Pad to jot down phone numbers. You can save them as described in “Scratch pad” on page 44. Call waiting If another call is received during a call, the message “Waiting” and name (or number) of the third calling party will appear on the screen. • To put the current call on hold and answer the incoming call, press key.
BenQ C600 Mobile Phone OTASP call The OTASP (Over-The-Air Service Provisioning) from your network service provider allows you to activate your network service simply by making a phone call. For details, please contact your network service provider. Call logs You can enter the Call Logs menu by pressing scroll key in main menu. or on the There are 6 options in the Call Logs menu. You can highlight the desired item by pressing or on the scroll key and then press key to select.
BenQ C600 Mobile Phone • Erase Logs: Press the “Select” soft key and then or on the scroll key to select the call logs to be erased ( Missed, Received, Dialed or Erase All). Reading messages Text messages When you have a new text message, the phone will generate an alert sound and the backlight will illuminate. “You have a new message!” and icon will also appear on the screen. A blinking icon means that you have received an urgent text message.
BenQ C600 Mobile Phone Knowing What Your Phone Says Your phone lets you know its working status by issuing sounds or displaying text prompts on the screen. Low battery warning If the battery power is getting low, the battery icon on the screen will start to flash. If the phone has run out of the battery completely, the battery empty message will appear on the screen and the phone will be turned off automatically. At this time, use the battery charger to charge the battery.
Chapter 3: Menu Options
BenQ C600 Mobile Phone In standby mode, you can press the “Menu” soft key to enter the Main Menu. You can press or on the scroll key to scroll through the menu items and press key or “Select” soft key to enter. The Main Menu includes many advanced options and you can get the most from your phone by using these functions.
BenQ C600 Mobile Phone Phone Book Menu Add a Phone Book record (Add) Select “Add” and press “Select” soft key. Follow the steps below to add a new Phone Book record: Step 1: You will be prompted to enter a list including all the personal information of that number, the name of that number, the mobile phone number, the office phone number, email address and so on.
BenQ C600 Mobile Phone Find a Phone Book record You can find a Phone Book record. Enter Phone Book, then scroll to “Find” and press “Select” soft key. All the Phone Book records will be listed in sequence on the LCD screen. You can scroll the Phone Book records by pressing or on the scroll key. When you find the Phone Book record you are looking for, press “Select” soft key to enter that record. All the information items of that record will appear on the screen.
BenQ C600 Mobile Phone or Activation: Press “Select” soft key to enter, and use on the scroll key to highlight "Activation", then press “Select” soft key to enter the submenu and use or on the scroll key to highlight "On" or “Off”. Then press “Select” soft key to activate this function or not. Erase All This function allows you to erase all the records in the phone memory.
BenQ C600 Mobile Phone Call Logs Menu The Call Logs menu is where you can store and manage phone numbers. You can use or on the scroll key to highlight an item and press “Select” soft key to enter. Call logs There are 6 options in the Call Logs menu. You can highlight the desired item by pressing or on the scroll key and then press the “Select” soft key. • All: Display the record of all calls.
BenQ C600 Mobile Phone Messages Menu The options in the Messages Menu allow you to deal with voice mail, text messages and Email. You can use or on the scroll key to highlight an item and press “Select” soft key to enter. Inbox The new messages will be displayed here. You can see the number of new messages. Compose This item allows you to compose messages. Press “Select” soft key to enter and you will be prompted to enter your desired messages. Outbox The messages you sent will be displayed here.
BenQ C600 Mobile Phone Voice mail The new voice mail messages will be displayed here. You can see the number of new voice mail messages and press “Read” to connect to your voice mail box. This is a network dependent function. Please contact your network service provider for details. Web Msg A Web Msg is a small WAP message. When the WAP browser receives an alert from the WAP server, the alert is put into Browser Alert Inbox.
BenQ C600 Mobile Phone Chat Room Creat a chat session that enables fast text message conversations with another phone. Email This item contains tools and mailboxes for receiving and sending emails. Write and send new messages To write a new message: There are 2 ways to write a new message: Option 1: In the Messages Menu, select “Compose”. Press or on the scroll key to the content field, press “Edit” soft key to enter the desired content of the message. When finished, press “OK” soft key.
BenQ C600 Mobile Phone Phone #: Enter the receiver’s phone number and press “OK” soft key. Phonebook: Pick up the receiver’s phone number from Phone Book. When finished, you can select “Send” soft key to send the message right away. Also, you can press or on the scroll key to the option field and press “Edit” soft key to access the options for this message. These options are shown as follows: 1. Save: Save this message to draft. 2. Callback #: Specify the callback number of this message. 3.
BenQ C600 Mobile Phone View outgoing messages The messages to be sent are stored in Outbox. You can enter the Outbox by selecting “Outbox” in the Messages Menu. If you have multiple outgoing messages, press key to browse messages. or on the scroll Press “Select” soft key to read the selected message. While reading the message, you can press the “Options” soft key and select from the options below: Status: Check to see if this message is sent successfully or not. Erase: Delete this message.
BenQ C600 Mobile Phone Callback #: You can set up the Callback number for all your outgoing messages here. You can also set up the callback number separately before you send a message. Delivery Acknowledgement: You can set up the status of message delivery acknowledgement here. If you set it to ”Yes”, you will receive a notification when a message is successfully sent or failed. Signature: Signature is a short text (e.g. your name) that will be automatically attached to your outgoing messages if enabled.
BenQ C600 Mobile Phone Tools Menu The Tools Menu provides several extra tools. You can use or on the scroll key to highlight an item and press “Select” soft key to enter. Browser Using Browser To enter Browser, select “Browser” in the Tools Menu and press “Select” soft key, then select “Start Browser”, or long press key in standby mode. A few seconds later, the home page will appear on the screen. Now you can access the various on-line information through your phone.
BenQ C600 Mobile Phone Key operations in Browser Please see the table below for the key operations in Browser: Press... To... End/Power key • Return to the home page. • Long press to exit Browser. Scroll key Select an item in a menu. • Return to the previous page. • Long press to return to the home page. • Clear current character when entering text. • Long press to clear all characters when entering text. Clear key Volume key Star key Long press to enter Browser options.
BenQ C600 Mobile Phone • Advanced: Provides advanced Browser setting options. Please contact your network service provider for details. Entering text in Browser You might be asked to provide text information when accessing online service (e.g, your ID number or sending messages), you can press alphanumeric keys to enter texts. Your phone provides 3 text entry modes. To switch among these modes, press right soft key until you find the desired one. alpha: Allows you to enter English characters.
BenQ C600 Mobile Phone Off: Press “Select” soft key and you can set the alarm clock function off. Calculator You can use your phone as a handy calculator. A cursor will appear at the upper left of the screen. Follow the chart below to enter numbers and arithmetic symbols.
BenQ C600 Mobile Phone Scheduler View your scheduler events There are 4 options in the menu. You can press or on the scroll key to select an option, and press "Select" soft key to enter. View Calendar: View the calendar and see the events of a particular day. View Event: View the events that have already occurred. Add Event: Add new events to your schedule. Erase All: Erase all events. If there are no events for your selection, "No Record" will appear on the screen.
BenQ C600 Mobile Phone Add an event You can add new events to your scheduler, and you can choose to let the phone generate an alarm to remind you of the event. To add a new event, first select "Add" then press "Select" soft key to select this item, then a "Reminder" menu appears: Meeting : add a new meeting. Call : add a new call (will prompt for a phone number). Birthday : add a new birthday. Other : add some other reminder.
BenQ C600 Mobile Phone Games Your phone provides 5 interesting games: Snake, Digit, Brick, Five Stone and Box World. Snake Make the snake grow longer by feeding it with as many goodies as possible. Use (up), (down), (right) and (left) to direct the snake to a goody. The longer the snake, the higher the score. You are not allowed to stop the snake or make it go backwards. When the snake hits its own tail or eggs, or the surrounding frame, a game is over. Then the screen will show your score.
BenQ C600 Mobile Phone Brick In this game you have to break an entire set of brick using a ball and a racket. When you have broken all of the bricks, you go to the next level with a new set of bricks to break. • Start a game by pressing the key to fire the ball. The ball is moving through the screen, bouncing in different directions after hitting the frame or the bricks. When the ball hits a brick, the brick disappears. • Use (left) and (right) to move the racket horizontally at the screen bottom.
BenQ C600 Mobile Phone Five Stone This is a traditional checker-type game in which the lining up of five pieces in a straight line scores victory. It’s a kind of gobang. Box World You have to push the boxes to the black spots to score. Hour Reminder With this function, you can set your hour reminder. Choose “On” and press “Select” soft key to activate this function. Currency Converter This function allows you to convert foreign and local currency.
BenQ C600 Mobile Phone Quick Key This item provides you a quick key list which allows you to find and use these common functions. With this function, you can easily find the function you want to use. Scratch pad The number you entered during a call (see “In call options” on page 18) is stored here. You can choose to save it to Phone Book. Download This function allows you to download information from internet by WAP function. There are four items for you to choose.
BenQ C600 Mobile Phone Settings Menu The options in the Settings Menu allow you to customize the date, display and other settings of your phone according to your preferences. You can use or on the scroll key to highlight an item and press “Select” soft key to enter. Date/Time Disp Time/Date • Press “Select” soft key to choose time and date display mode. Date Format • Press “Select” soft key to choose date display format. Time Format • Press “Select” soft key to choose time display format.
BenQ C600 Mobile Phone • Press the alphanumeric keys to set up current hour and minute. Use or on the scroll key to select “AM” or “PM”. Press “OK” soft key. • Then, use the alphanumeric keys to set up current date. • Press “OK” soft key. Screen Saver Your phone provides screen saver function. After you activate the screen saver, if no incoming call is received and you leave the keypad untouched for about 5 minute, the animation will appear on the screen.
BenQ C600 Mobile Phone Duration Press “Select” soft key to view the option list and use or on the scroll key to highlight an item, then press “Select” soft key to select. 5 Seconds: If no key is pressed after the back light is on for 5 seconds, it will be turned off automatically. 10 Seconds: If no key is pressed after the back light is on for 10 seconds, it will be turned off automatically. 20 Seconds: If no key is pressed after the back light is on for 20 seconds, it will be turned off automatically.
BenQ C600 Mobile Phone Answer By When an incoming call is received, you can choose to use one of the following modes to answer that call. To choose an answer mode: • Press “Select” soft key to view the options and use or the scroll key to highlight the mode you want to use: on Send Key: The call can be answered by pressing “Send” key on the keypad. Any Key: The call can be answered by pressing any key on the keypad. FlipActivate: The call will be answered in flipactivation mode.
BenQ C600 Mobile Phone Restore Default Value This item allows you to restore the default value when the phone is having problems. These default values are factory settings optimized for your phone. You will be prompted to enter your phone code before the default values are set.
BenQ C600 Mobile Phone Call Srvcs Menu The Call Services Menu allows you to set up call and network services. You can use or on the scroll key to highlight an item and press “Select” soft key to enter. Limit Alert When you dial a call, answer an incoming call or on conversation, if the total call time exceeds the time limit set here, the limited alert timer will give you a warning pop up display and beep. To set up usage limit: • Press “Select” key to enter Limit Alert On/Off menu.
BenQ C600 Mobile Phone System Select You can choose the home system to use. To select: • Use or on the navigation key to scroll the options below: Home Only: Use only home network. Automatic: The phone selects the automatically. home system • Press “Select” soft key to select. Data Service This item allows you to change the data service: Voice Mode, Fax Mode, and Data Mode. • Once: Operating Fax or Data mode once and then it will go back to voice mode.
BenQ C600 Mobile Phone Audio Menu The Audio Menu allows you to set up or change the audio settings of the phone. There are 5 submenus: Profiles, System Alert, Answer By, DTMF Setting, and Melody Editor, which provide you audio selection in the Audio menu. You can use or on the scroll key to highlight an item and press “Select” soft key to enter. Profiles Enter this sumenu to use built-in audio function. Press “Select” key to choose audio function.
BenQ C600 Mobile Phone Security Menu The options in the Security Menu can help keep your phone from unauthorized access. You have to enter the lock code to enter the submenu. The default lock code is the last four digits of your phone number. After you enter the security code, you can use or on the scroll key to highlight an item and press “Select” soft key to enter. Lock Status This function allows you to lock the phone.
BenQ C600 Mobile Phone Call restrict This function allows you to restrict incoming and outgoing calls. Incoming Restrict all incoming calls. Outgoing Restrict all outgoing calls. Roam Incoming Restrict all incoming calls when you are roaming. Roam Outgoing Restrict all outgoing calls when you are roaming. Emergency number You can store three emergency numbers in the emergency number list. When the phone is locked, only numbers that match the numbers in the emergency number list can be dialed.
Chapter 4: Care and Maintenance
BenQ C600 Mobile Phone Your phone is a delicate electronic device and should be used and handled carefully in compliance with the instructions below. Failure to observe these instructions may void your product warranty. • Do not use your phone in dusty and humid areas. Your phone is extremely vulnerable to liquid and sand grains can scratch the surface of your phone. • Do not store your phone in extremely hot or cold areas. Heat can cause damage to both the outer case and components inside the phone.
Chapter 5: Troubleshooting
BenQ C600 Mobile Phone When you encounter problems while using your mobile phone, please refer to the following table to solve the problem. If problem persists, please contact your dealer immediately for service. Problems Possible cause How to solve the problem You are using your mobile phone in a location (e.g. in Move to a location where signal the basement or building) can be better received. where signal is weak.
BenQ C600 Mobile Phone The battery or charger is Contact your dealer. malfunctioning. Unable to charge The phone temperature is Change the battery charging the battery under 41°F or above 104°F. environment. Check to see if all connectors are connected properly. Poor connection. Unable to input The Phone book memory is Delete some data from the data into the Phone full. Phone Book. Book Your network Unable to choose provider doesn't certain function(s) such function(s).
BenQ C600 Mobile Phone
