User’s manual Table of Contents FCC STATEMENT..................................................................................................................1 FCC Notice ................................................................................................................................................... 1 LCD TV H200: A CLASS B digital device........................................................................................ 1 IMPORTANT SAFETY INSTRUCTIONS................................
BENQ Corporation How to Use Hot Key Function for Adjustment...................................................................................32 Utility Setting (TV mode only).................................................................................................................33 TV system with Closed Caption and V-chip (USA only)....................................................................35 Set Up Utility function...........................................................................
User’s manual FCC STATEMENT FCC Notice LCD TV H200: A CLASS B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
BENQ Corporation IMPORTANT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
User’s manual incompatible outlet. Do not attempt to bypass the safety purpose of the polarized and grounded plug. The 3-wire grounding-type plug will fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your incompatible outlet. Do not attempt to bypass the safety purpose of the grounding type plug. 10.
BENQ Corporation 19.Safety checks—Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition. 20.Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer. This is a safety feature. 21.Stand—Do not place the product on an unstable trolley, stand, tripod or table.
User’s manual For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can collide with such power lines or circuits.
BENQ Corporation SAFETY TIPS Please read and follow the safety tips listed below to ensure the equipment is free from damage, and to ensure that no injury will occur as a result of improper use. Do not insert any object, especially metal or liquids, into the TV. Do not place any objects containing water or any other liquid on top of the TV. Do not place the unit in direct sunlight, near heaters or in extremely dusty or humid locations.
User’s manual If problems occur during use If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the H200, unplug the power cord immediately. Continuous use of the Display under these conditions might cause fire or permanent damage to the unit. Have the Display evaluated at an Authorized Service Center. Services to the Display by any unauthorized personnel are strongly discouraged due to its dangerous high voltage nature.
BENQ Corporation INTRODUCTION Congratulations on your purchase of the BenQ LCD TV H200. Your H200 will provide you with many years of enjoyment no other LCD TV can match. It is compatible with today’s current NTSC, PAL and SECAM systems, as well as tomorrow’s DTV standards. This TV is extremely easy to use and features high performance picture quality. The H200 is extremely versatile; it can be mounted on a wall or table stand, and it can be used in any ambient light environment.
User’s manual SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product. Operation Manual (x1) Remote Control (x1) Power Adapter (x1) Power Cord (x1) Size AAA Dry Battery (x2) D-Sub Cable (x1) Composite Video Cable (X1) S-Video cable (x1) Note: The AC Power core type is different in different territories.
BENQ Corporation PREPARATION Using the Remote Control Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation Cautions regarding use of remote control Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. Do not install or place the remote control under direct sunlight.
User’s manual Power Connection Household power outlet AC cord 1. 2. 3. To DC input terminal (DC 19V) AC adapter Connecting the female plug to the AC socket on AC adaptor. Connecting the AC adaptor to the DC power input of the set. Connecting the male plug to the wall outlet as illustrated. Notes: Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.
BENQ Corporation ANTENNAS The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied). 2.
User’s manual FRONT AND REAR CONTROL OPTIONS Main unit (Front view) Channel ( ) / ( ) Power Menu Speaker Input Remote Control Sensor Window Power indicatior Speaker Volume (+) / (-) POWER indicator A BLUE indicator lights when the power is on. The light is off when in the standby mode (the indicator will flash when the set is in power saving mode.). To change the vertical angle of the LCD TV set, tilt the screen up to 12 degrees forward. The TV set can also be rotated 60 degrees horizontally.
BENQ Corporation Main unit (Rear view) ANTENNA TERMINAL VIDEO AUDIO(L) AUDIO(R) S-VIDEO Y Pb/Cb Pr/Cr PC D-SUB POWER INPUT(DC 19V) PC AUDIO DC OUTPUT(19V; 0.6A MAX.) 1.Power Input terminal (DC 19V): Connect this terminal to the power Adapter and power cord supplied with the TV. 2.Antenna terminal: Connect this terminal to the antenna cable (not supplied) 3.Composite video Input (RCA Connector): Connect this terminal to the Composite Video output terminal of your DVD Player or other Video source. 4.
User’s manual Listening with Headphones Plug the headphone mini-plug into the HEADPHONE jack located on the front bottom of the TV set. Headphones Notes: Headphones are not included in the supplied accessories. No sound will be heard from the main unit speakers when a headphone mini-plug is connected into the HEADPHONE jack. CONNECTIONS Carefully check the terminals for position and type before making any connections. Loose connectors can result in image or color problems.
BENQ Corporation How to connect the AV Input Terminals Composite VIDEO Signal Connection (RCA) Example of input signal source Connect the composite signal terminal on the TV to the output of AV equipment through composite cable (RCA connector) as illustrated Video game Note: Composite video is the most common type of signal used, but is also the lowest in picture quality. Many sources have outputs that are limited to Composite video, such as some VCR’s and camcorders.
User’s manual Note: 1. Component video is the best type of signal that can be used. The most common sources that use Component outputs are DVD players, and it is highly recommended that Component be used when possible. Component video goes one step beyond S-Video in picture quality. All HDTV signals must be input into this port. It may also be used for other high-resolution signals such as progressive DVD players or computers. 2. Connect the output of a progressive DVD Player to Component Input (Y Pb Pr).
BENQ Corporation REMOTE CONTROL There are 37 keys on the remote control: 1. POWER: Press this button to turn on the TV set. Press again to enter the standby mode. 1.POWER 2.INFORMATION 2. INFO: Press this button to turn on the TV channel message and any signal message (Including Video and PC). Press again to turn off. 3.Channel Select 4.Channel Return 5.MENU 6.INPUT / 7.EXIT 8. / / / ENTER 3. Channel Select: Press these buttons to select the TV channel you want to enter. 4.
User’s manual OPERATION Before using the TV set, please check your TV system first and adjust TV set to comply with the TV broadcasting system in your territory. (There will be slightly different selection items in different TV systems) Note: The 3 Dimensional Y/C separation circuit only works when the color system is set to NTSC 60Hz / 3.58 MHz in TV mode and Video mode. The 3 Dimensional Y/C separation circuit is used to remove flickering and color bleeding.
BENQ Corporation Sound Volume Adjustment SOUND FUNCTION 1. 2. Press “VOL+” to increase the sound volume. The length of the indicator increases. Press “VOL– “to decrease the sound volume. The length of the indicator decreases. To mute the sound 1. Press “MUTE” to temporarily turn off the sound. The MUTE mark is 2. 3. displayed. Press “MUTE” or “VOL+/–“ to restore the sound back to the previous level.
User’s manual CHANNEL FUNCTION Channel Select Channel Return To select a 3-digit channel number (e.g., Channel 120): Complete each digit within 3 seconds. 1. Press the “1” button. 2. Press the “2” button. 3. Press the “0” button. Changing channels with CH +/- on the remote control or on Front control panel. Press ”CHRTN” on the remote control to quickly return to the previous channel you selected CH+/- .
BENQ Corporation Function Operation How to use the OSD menu This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired menu item by following the steps below and then refer to the indicated page for details. MENU FUNCTION 1. Press “MENU ” or “MENU ” buttons on the Remote Control as in the illustration or “Menu” button on Control Panel to select “OSD” main page, then the main menu screen will appear as follows: 2.
User’s manual Adjusting the Sleep Timer Settings You can set the SLEEP TIMER to automatically turn off the TV. Directly setting the SLEEP TIMER SLEEP 1. You can directly press “SLEEP” button on Remote Control as illustrated to set the sleep timer (in minutes) and the screen display information as follows: 2. 3. Press “SLEEP” again to select different setting value. The time can be set in increments of 30 minutes and in the range between 0 and 150 minutes.
BENQ Corporation Aspect Controls ASPECT 1. You can directly press “ASPECT” button on Remote Control as illustrated to select the Image Aspect Ratio you prefer and the screen display information appears as follows: ASPECT Advance menu (In Video Mode) Setting the ASPECT on the MENU screen 1. Press “MENU ” or “MENU ” buttons on the Remote Control or “Menu” button on Control Panel to select 2.
User’s manual Freeze FREEZE Press the “FREEZE” button on the Remote Control to hold on the image on the screen (the video sources still run). Press again to reactivate the image. The icon will show on the right bottom on the screen as in the following illustration. Note: In PC or Y/Pr/Pr mode, the freeze function has no effect. FREEZE OSD Menu Adjustment Picture Adjustments Picture menu (In PC Mode) 1. 2. 3.
BENQ Corporation Press “MENU” button to exit. If the above information is displayed on the screen, set your signal input as optimal resolution (800x600) and you will get the best picture in PC mode. In PC Mode Option Function Operation Auto Adjustment Automatically adjusts Phase, Clock, Press or Picture Position in PC mode. “ENTER” to execute it. Brightness Adjusts screen brightness. Brighter screen. Darker screen. Contrast Adjusts image contrast. Higher contrast. Lower contrast.
User’s manual Advance Adjustments Advance menu (In PC Mode) 1. 2. 3. Press “MENU ” or “MENU ” buttons on the Remote Control or “Menu” button on Control Panel to choose the ” main menu page as illustrated. “Advance Press or buttons to choose the option items you want to adjust. When you finish selecting the desired option, use or to change the value or selection for that option. Advance menu (In Video and TV Mode) In PC Mode Option H.
BENQ Corporation Color Temp. Adjusts Image color temperature. User Color Temp. Adjusts and memorizes the color Use or “ENTER” to Temp. based on user special enter the sub menu. preferences. (If you do not choose “User” in Color Temp. option, this function is no use) Adjusts Video advance items. Use or “ENTER” to enter the sub menu. Advanced Options Warm: More red-tinged colors Standard: Standard color temperature Cool: More blue-tinged colors User Use or to specify a desired color temperature.
User’s manual 5. 6. Option Red Green Blue Function Adjusts the amount of red in the image. Adjusts the amount of green in the image. Adjusts the amount of blue in the image. Adjust the Red, Green and Blue value to change the picture color you preferred. The color setting will automatically store in the memory in each adjustment. Operation Use or to select a value. Range 0 to 100 Use or to select a value. 0 to 100 Use or to select a value.
BENQ Corporation Utility Setting (PC and Video Mode) Utility menu (In PC and Video Mode) 1. 2. 3. Option Sleep Timer Backlight Reset to default Function Set the Sleep Timer to automatically turn off the Set. Adjusts the panel backlight. Restores all functions to default values. Press “MENU ” or “MENU ” buttons on the Remote control or “Menu” button on control panel “main menu page. to choose the “Utility Press or buttons to choose the option items you want to adjust.
User’s manual Option OSD Position OSD Background OSD Timeout OSD Language Function Adjusts the OSD showing position on the screen. Adjusts the OSD background setting. Adjusts the OSD disappearing time if you do not take any action. Selects the OSD language. Operation Range Use or to select it. There are 9 positions Use or to select it. Opaque and Translucent Use or to change the value. 5~255 sec. Use or to select it.
BENQ Corporation INFO To display the signal information (TV, AV or PC) on the screen, you can also press the “INFO” button on the Remote Control. INFO How to Use Hot Key Function for Adjustment 1. You can directly press” ”or” ” buttons to start the hot key function ↓ 2. Press or buttons to adjust the option value . ↓ 3. The hot key function sequence appears as illustrated.
User’s manual Utility Setting (TV mode only) Utility menu 1. 2. Option Sleep Timer Backlight More TV Options Reset to default. Press “MENU ” or “MENU ” buttons on the Remote control or “Menu” button on control panel to choose the “Utility ” main menu page when in TV mode. Press or to select option items and press or “ENTER” to select or enter it. Function Adjusts sleep timer to automatically turn off the TV set. Adjusts the panel backlight. Adjusts the advanced TV function.
BENQ Corporation TV/CATV Selects the mode for TV and Cable TV Use to select it. system. AIR, CATV STD, CATV HRC, CATV IRC Add Channel Adds weak or additional channels or erases unwanted channels from TV memory. Added and Erased Auto Scan Channel The tuner will search through all Use “ENTER” or to available channels in your area and add search the channel them to the TV’s memory. Use or to select it.
User’s manual TV system with Closed Caption and V-chip (USA only) Set Up Utility function 1. 2. Option Sleep Timer Function Adjusts sleep timer to automatically turn off the TV set. Adjusts the panel backlight. Adjusts Close Caption setting. Backlight Close Caption V-CHIP Blocking Setting More TV Options Reset to default. Adjusts V-Chip setting. Adjusts the advanced TV function. Restores all functions default values.
BENQ Corporation Set Up CLOSED CAPTION SETTING CLOSED CAPTION This TV set is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows conversations, narration, and sound effects in TV programs and home videos to be viewed as captions on the TV screen (see the illustration). Not all the programs and videos will offer closed captioning. Please look for the “ ” symbol to ensure that captions will be shown. Utility menu 1. 2. 3.
User’s manual R RESTRICTED. Under 17 requires accompanying parent or adult guardian. NC-17 NO ONE 17 AND UNDER ADMITTED. X X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.: MPAA RATING (examples) Example 1: PG-13 in the age-based rating is blocked, this will also automatically block the higher ratings R, NC-17 and X. Example 2: R in the age-based rating is blocked, this will also automatically block the higher ratings NC-17 and X.
BENQ Corporation Adjust V-Chip setting [1] FIRST TIME SET UP V-CHIP Utility menu 1. 2. 3. Press “MENU ” or “MENU ”buttons on the Remote Control or “Menu” button on Control Panel to choose the ” main menu page as illustrated. “Utility Press or buttons to select “V-CHIP Blocking Setting…” item and Press or “ENTER” to enter the sub menu. You should set the password before using this function. The sequence is as follows: Input 4 digit. Back to new password Password match Password mismatch. 4.
User’s manual [2] MPAA RATING 1. 2. 3. 4. Repeat the steps 1 and 2 of [1] FIRST TIME SET UP VCHIP “Enter Password” will be displayed. Input the password you have set before. Input the 4-digit secret number by using the channel select keys. Press or buttons to select “MPAA” item. Use or to switch between available choices for the selected option. [3] TV GUIDELINES 1. 2. 3. 4. Repeat the steps 1 and 2 of [2] MPAA RATING. Press or buttons to select “TV Guide” setting.
BENQ Corporation Press “EXIT” button Correct password Incorrect password Back to new password Password mismatch Password match If you forget the password you set before, you can press “2” “4” “6” “8” when the “old password” information is displayed, then you can set a new password.
User’s manual TROUBLESHOOTING Before you call for service, determine the symptoms and make a few simple checks as shown below. TV set: SYMPTOMS Power does not turn ON There is no picture or sound There are spots on the screen Degraded colors or tints Improper screen position or size The image appears distorted The image is purple The image appears too bright, and there is a loss of definition in the brightest areas of the image.
BENQ Corporation Some lines occur at the bottom of pictures when playing VHS tapes. The video picture is abnormal. VHS tapes sometimes can't provide stable pictures when playing or pausing. And the unstable pictures may cause the LCD TV to display incorrectly. If this situation happens, please press "i" key on the remote controller to let the LCD TV check the signal again and display the pictures correctly.
User’s manual SPECIFICATIONS Model Name Size Aspect Ratio Resolution Pixel Pitch Brightness Contrast Ratio Audio amplifier Signal Input Terminal H200 20.1” 4:3 800 x 600 0.51 x 0.51 (mm) 500 nit 500:1 3W x 2 TV: TV Tuner x1 Video: Composite video input (RCA pin) x 1 S-Video (Mini din 4 pin) x 1 Component video input (RCA pin) x1 Audio input (L/R RCA pin) x 2 PC: PC D-sub (Mini D-sub 15 pin) x 1 PC Audio (M3.5 jack) x 1 Output Terminal Headphone (Mini-jack) x 1 19VDC 0.
BENQ Corporation FRONT ACRYLIC SHEET CLEANING A liquid detergent and water solution is the recommended cleaner for the ACRYLIC sheet. While the use of abrasive cleaners is not recommended, the following brand name cleaners have been tested and found to work well on coated surfaces. CAUTION: some of these cleaners may attack the uncoated side or edges of the sheet. Fantastik household cleaner Formula 409 household cleaner Glass Plus cleaner Mr.
User’s manual SUPPORTED OPERATING MODES Resolution 720×400 640×480 640×480 640×480 640×480 800×600 800×600 800×600 800×600 832×624 1024×768 1024×768 1024×768 Horizontal Frequency(Khz) 31.47 31.50 35.00 37.50 37.86 35.16 37.90 46.90 48.08 49.00 48.40 56.50 60.00 Vertical Frequency(Hz) 70.08 60.00 67.00 75.00 72.81 56.25 60.32 75.00 72.19 74.00 60.00 70.00 75.00 Dot Clock Frequency(Mhz) 25.17 25.18 30.24 31.50 31.50 36.00 40.00 49.50 50.00 57.27 65.00 75.00 78.75 Remark DOS DOS Mac.
BENQ Corporation DIMENSIONAL DRAWINGS 46 Dimensional drawings