User Manual

52
10
Echo (ASCII) Echo (Hex)
>*pow=on#*POW=ON# 3E 2A 70 6F 77 3D 6F 6E 23 0D 0D 0A 2A 50
4F 57 3D 4F 4E 23 0D 0A
If system already turn on and send command again
>*pow=on#*POW=ON# 3E 2A 70 6F 77 3D 6F 6E 23 0D 0D 0A 2A 50
4F 57 3D 4F 4E 23 0D 0A
Type Operation ASCII HEX
Write Power Off <CR>*pow=off#<CR> 0D 2A 70 6F 77 3D 6F 66 66 23
0D
Echo (ASCII) Echo (Hex)
>*pow=off#*POW=OFF# 3E 2A 70 6F 77 3D 6F 66 66 23 0D 0D 0A 2A 50
4F 57 3D 4F 46 46 23 0D 0A
If system already turn off and send command again
>*pow=off#*POW=OFF# 3E 2A 70 6F 77 3D 6F 66 66 23 0D 0D 0A 2A 50
4F 57 3D 4F 46 46 23 0D 0A
Type Operation ASCII HEX
Read Power Status <CR>*pow=?#<CR> 0D 2A 70 6F 77 3D 3F 23 0D
Echo (ASCII) Echo (Hex)
> *pow=?#ON# 3E 2A 70 6F 77 3D 3F 23 0D 0D 0A 2A 50 4F 57
3D 4F 4E 23 0D 0A
Note : This is in power on status.
>*pow=?#*POW=OFF# 3E 2A 70 6F 77 3D 3F 23 0D 0D 0A 2A 50 4F 57
3D 4F 46 46 23 0D 0A
Note : This is in power off status.
5.1 Source Selection
Note: the command definition is for all input source, it may not be available for some model
due to the difference of product specification
Type Operation ASCII Note
Write Computer/YPbPr <CR>*sour=RGB#<CR> power on
Write Computer2/YPbPr2 <CR>*sour=RGB2#<CR> power on