Owners manual

Positioning your projector 19
Shifting the projection lens
The lens shift control provides flexibility for installing your projector. It allows the
projector to be positioned off the center of the screen.
The lens shift is expressed as a percentage of the projected image width or height. It is
measured as an offset from the projected image’s horizontal or vertical center. You can
shift the projection lens within the allowable range depending on your desired image
position.
Lens shift adjustment will not result in a degraded picture quality. In the unlikely event that the
image distortion is produced, see "Correcting keystone" on page 32 for details.
Front Table
Normal projection position
Max
0/125V
1V
0.025H
0/025H
Height of projected image
Width of projected image
1H
Shift to Left
Shift to Right
Front Ceiling
1V
Max
0/125V
Vertical Shift
Ver
tical
Shift
Height of projected image
Center of lens
Center of lens