User Guide
Table Of Contents
- Table of contents
- Important safety instructions
- Projector features
- Positioning your projector
- Connection
- Operation
- Menu Functions
- About the OSD Menus
- Using the Basic OSD menu
- Using the Advanced OSD menu
- Securing the projector
- Utilizing the password function
- Switching input signal
- Picture menu
- Audio Setup menu
- Display menu
- System Setup : Basic menu
- System Setup : Advanced menu
- Information menu
- Shutting down the projector
- Advanced OSD menu structure
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Connection20
Connection
W hen connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
• In the connections shown below, some cables may not be included with the projector (see
"Shipping contents" on page 8). They are commercially available from electronics stores.
• T he connection illustrations below are for reference only. The rear connecting jacks
available on the projector vary with each projector model.
*For updating the firmware.
1. USB cable*
2. VGA cable
3. HD MI cable
4. Component Video to VGA (D -Sub)
adapter cable
5. Component Video to Component
cable
6. Video cable
7. Audio L/R cable
8. Audio cable
9. HD MI-Micro USB cable
8
7
6
8
1
3
4
3 9
3
2
5
N otebook or desktop
computer
A/V device
Speakers
Smartphone or
tablet PC