User Guide

Menu Functions38
3D Sync Invert
W hen your 3D image is distorted, enable this function to switch between
the image for the left eye and the right eye for the more comfortable 3D
viewing experience.
The function is accessible through the remote control.
Settings Press OK to enter its submenu. See below for more details.
• 3D Sync Mode Selects a sync mode for your 3D glasses.
•Projector
Position
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See
"Choosing a location" on page 16 for details.
• Test Pattern
Enables this function to display the grid test pattern, which helps you
adjust the image size and focus so as to check if the projected image is
free of distor tion.
• Auto Source
Search
Sets whether the projector searches automatically for input sources.
Select On to enable the projector to scan for input sources until it
acquires a signal. If the function is set to O ff, the projector selects the
last used input source.
• Menu Type Switches to the Advanced O SD menu.
•HDMI Format
Selects an input source type for the H D MI signal. You can also manually
select the source type. The different source types carr y different
standards for the brightness level.
HDMI Format is only available when the H DMI signal is selected.
•Reset Lamp
Timer
Activates this function only after a new lamp is installed. W hen you select
Reset, a "Reset Successfully" message displays to notify that the lamp
time has been reset to "0".
• Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Language,
Projector Position, and Reset Lamp Timer.
•Information
D isplays the following information about your projector.
• Source: Displays the current signal source.
• Picture Mode: D isplays the current Picture Mode.
• Resolution: D isplays the native resolution of the input source.
• Color System: D isplays input system format.
• Lamp Usage Time: Displays the number of hours the lamp has
been used.
• 3D Format: D isplays the current 3D mode.
3D Format is only available when 3D Mode is enabled.
• Firmware Version: D isplays the firmware version of your
projector.
Some information is given only when certain input sources are in
use.
Menu Submenus and Descriptions