User Guide

Menu Functions 41
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. O therwise, purchase a
lock, such as a Kensington lock, to secure the projector. You can locate a Kensington lock
slot on the left side of the projector. See
"Kensington anti-theft lock slot" on page 9 for
details.
A Kensington security cable lock is usually a combination of key(s) and a lock. Refer to the
lock’s documentation for finding out how to use it.
Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an
option for setting up password security. The password can be set through the O n-Screen
D isplay (O SD ) menu. For details of the O SD menu operation, please refer to
"Using the
Advanced O SD menu" on page 40.
You will be inconvenienced if you activate the power-on lock functionality and subsequently
forget the password. Print out this manual (if necessary) and write the password you used in this
manual, and keep the manual in a safe place for later recall.
Setting a password
Once a password has been set, the projector cannot be used unless the correct password is
entered every time the projector is started.
1. O pen the O SD menu and go to the System Setup: Advanced > Password menu.
Press OK. The Password page displays.
2. Highlight Power on Lock and select On by pressing ◄/►.
3. As pictured to the right, the four arrow keys
(▲/▼/◄/►) respectively represent 4 digits (1,
2, 3, 4). According to the password you desire
to set, press the arrow keys to enter six digits
for the password.
4. Confirm the new password by re-entering the
new password.
O nce the password is set, the O SD menu
returns to the Password page.
5. To activate the Power on Lock function, press
▲/▼ to highlight Power on Lock and press ◄/► to select On.
The digits being input will display as asterisks on-screen. W rite your selected password down
here in this manual in advance or right after the password is entered so that it is available to you
should you ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
6. To leave the O SD menu, press BACK.