User Guide
Table Of Contents
- Table of contents
- Important safety instructions
- Projector features
- Positioning your projector
- Connection
- Operation
- Menu Functions
- About the OSD Menus
- Using the Basic OSD menu
- Using the Advanced OSD menu
- Securing the projector
- Utilizing the password function
- Switching input signal
- Picture menu
- Audio Setup menu
- Display menu
- System Setup : Basic menu
- System Setup : Advanced menu
- Information menu
- Shutting down the projector
- Advanced OSD menu structure
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Maintenance 69
Indicators
Light
Status & DescriptionPower T e m p Lamp
Power event s
Orange Off Off Stand-by mode
Green
Flashing
Off O ff Powering up
Green Off Off N ormal operation
Orange
Flashing
Off O ff Projector is cooling.
Lamp events
Off O ff
Orange
Flashing
The lamp ignition is not lit up.
Off Off Red
1. The projector needs 90 seconds to cool down. Or
2. Please contact your dealer for assistance.
Thermal events
Red Red Off
The fans are not
working.
The projector has shutdown
automatically. If you tr y to re-start the
projector, it will shutdown again.
Please contact your dealer for
assistance.
Red
Red
Flashing
Off
Red Green Off
Red
Green
Flashing
Off
Green Red Off Temperature 1 error (over limited temperature).
Green
Red
Flashing
Off Thermal sensor 1 open error.
Green Green Off Thermal sensor 1 short error.
Green
Green
Flashing
Off Thermal IC #1 I2C connection error.
Green Red Red Thermal break error.
System events
Green O ff Red
The projector has shutdown automatically. If you try to re-start
the projector, it will shutdown again. Please contact your dealer
for assistance.
Red
Flashing
Off O ff
Red Off Red
Off Green Red
Lamp door is open. Please check if the lamp door is open or not
closed properly.
Green O ff Orange Lamp life exhausted.
Red Off Off D ownload.
Off Red Off LAN download fail.
Off Green Off LAN download processing.