Recycle Disassemble Instruction (Dismantled Information) Requirements according to ANNEX VII of DIRECTIVE 2012/19/EU on waste electrical and electronic equipment (WEEE) Materials and components with hazardous content LCDs may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the printed circuit boards assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required.
Disassembly Tools Tool Philips Screwdriver for M3 screw nosed pliers Diagonal Cutting Pliers Slotted screwdriver Six Point Sockets Philips Screwdriver for M2.
Disassembly process Dismantle 4 pieces of M8 x 20mm P head flat tail ,elastic pad black galvanized machinery screws. Dismantle 3 pieces of M3 × 6mm meson head nickel plating mechanical screws.
Dismantle 16 pieces of M3 × 6mm meson head nickel plating mechanical screws. 1、Dismantle 15 pieces of M4 × 6mm flat round head nickel plating mechanical screws. 2、Open the back cover. 1、Dismantle 3 pieces of M4 × 6mm flat round head nickel plating mechanical screws. 2、Dismantle 1 piece of Ф4 x 5 mm round head toothed pads blue zinc plating machine screw.
3、Remove the AC bracket. 1、Dismantle 8 pieces of M3 × 6mm meson head nickel plating mechanical screws. 2、Dismantle 7 pieces of M4 × 6mm flat round head nickel plating mechanical screws. 3、Remove the back shell at the bottom. 1、Dismantle 2 pieces of M4 × 6mm flat round head nickel plating mechanical screws. 2、Remove the IO baffle.
1、Dismantle 3 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws. 2、Remove the USB board. 1、Dismantle 4 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws. 2、Remove the MIC board.
1、Dismantle 3 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws. 2、Remove the OPS board. 1、Dismantle 4 pieces of M5 × 8mm meson head black galvanized mechanical screws. 2、Separate the EVA pad from the sound. 1、Dismantle 7 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws. 2、Remove the motherboard.
1、Dismantle 6 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws. 2、Remove the power panel. 1、Dismantle 2 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws. 2、Dismantle 2 pieces of M3 × 4mm meson head nickel plating mechanical screws. 3、Remove the OPS iron bracket. 1、Dismantle 3 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws. 2、Remove the iron support.
1、Dismantle 3 pieces of M3 x 5mm flathead flat tail blue zinc plating machinery screws. 2、Remove the iron support. 1、Dismantle 4 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws. 2、Remove the horn bracket. 1、Dismantle 3 pieces of M4 × 6mm flat round head nickel plating mechanical screws. 2、Remove the IO baffle.
1、Dismantle 3 pieces of M3 × 8mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws. 2、Remove the shielding can. 1、Dismantle 8 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws. 2、Remove 8 plastic buckles. 1、Dismantle 6 pieces of M3 × 6mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws. 2、Remove 6 rear shell supports.
1、Dismantle 10 pieces of M3 × 8mm P head, flat tail, elastic pad, flat pad, blue galvanized mechanical screws. 2、Remove aluminum profile assembly. 1、Dismantle 2 pieces of M3×3mm H =11mm flat tail Blue zinc plating machinery hexagon studs. 2、Dismantle 4 pieces of M3×2.5mm H =5mm flat tail Blue zinc plating machinery hexagon studs.
