Operation Manual

English
13
Controls and functions
Control panel
y MENU/EXIT
Turns on the On-Screen Display (OSD) menu. Goes back to previous OSD menu, exits and saves
menu settings. See “Using the menus” on page 31 for details.
y Volume/Arrow keys ( /◄ Left)
Turns down the volume.
y SOURCE
Displays the source selection bar.
y MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display (OSD) menu item. See “Using the menus” on page 31 for
details.
y Keystone/Arrow keys ( /▼ Down)
Manually corrects distorted images resulting from an angled projection. See “Correcting 2D keystone”
on page 29 for details.
y AUTO
Automatically determines the best picture timings for the displayed image. See “Auto-adjusting the
image” on page 28 for details.
y Volume/Arrow keys ( /► Right)
Turns up the volume.
y POWER
Toggles the projector between standby mode and on. See “Starting up the projector” on page 27 and
“Shutting down the projector” on page 48 for details.
y Keystone/Arrow keys ( / ▲ Up)
When the On-Screen Display (OSD) menu is activated, the ▲, ▼, ◄ and ► keys are used as
directional arrows to select the desired menu items and to make adjustments. See “Using the menus”
on page 31 for details.
y ECO BLANK
Used to hide the screen picture. See “Hiding the image” on page 41 for details.