Operation Manual

English
54
Description of each menu
FUNCTION DESCRIPTION
1.DISPLAY menu
Wall Color
Corrects the projected picture’s color when the projection surface is not
white. See “Using Wall Color” on page 37 for details.
Aspect Ratio
There are several options to set the image's aspect ratio depending on
your input signal source. See “Selecting the aspect ratio” on page 35 for
details.
2D Keystone
Adjust the shape of projected image to ensure that all the lines forming the
four angles are straight ones. See “Correcting 2D keystone” on page 29 for
details.
Corner Fit
Adjust the shape of projected image to ensure that one angle stays
perpendicular. See “Adjusting corner t” on page 30 for details.
Position
Displays the position adjustment page. Press arrow key to move project
image. Press this key to scroll through values shown in bottom of page
from the least to the maximum or vice versa.
This function is only available when a PC signal (analog RGB) is selected.
Phase
Adjusts the clock phase to reduce image distortion.
This function is only available when a PC signal (analog
RGB) is selected.
H. Size
Adjusts the horizontal width of the image. This function is only available
when a PC signal (analog RGB) is selected.
Digital Zoom
Shows the digital zoom function with Zoom bar.
y PC: 1.0x~2.0x,
y Video: 1.0x~1.8x