Operation Manual
English
56
FUNCTION DESCRIPTION
2.PICTURE menu
Picture Mode
Pre-dened picture modes are provided so you can optimize your
projector image set-up to suit your program type. See “Selecting a picture
mode” on page 37 for details.
Reference
Mode
Selects a picture mode that best suits your need for the image quality and
further ne-tune the image based on the selections listed on the same page
below. See “Setting the User 1 mode” on page 38 for details.
Brightness
Adjusts the brightness of the image. See “Adjusting Brightness” on page 38
for details.
Contrast
Adjusts the degree of difference between dark and light in the image. See
“Adjusting Contrast” on page 38 for details.
Color
Adjusts the color saturation level -- the amount of each color in a video
image. See “Adjusting Color” on page 38 for details.
This function is only available when selecting the video or
S-video of the NTSC system.
Tint
Adjust red and green tint of image. See “Adjusting Tint” on page 38 for
details.
This function is only available when selecting the video or
S-video of the NTSC system.
Sharpness
Adjusts the image to make it look sharper or softer. See “Adjusting
Sharpness” on page 38 for details.
This function is only available when selecting the video or
S-video of the NTSC system.
Brilliant Color
Adjust the white peak value while ensuring that the color is displayed
correctly. See “Adjusting Brilliant Color” on page 38 for details.
Color
Temperature
See “Selecting a Color Temperature” on page 39 for details.
Color
Temperature
Fine Tuning
See “Setting a preferred color temperature” on page 39 for details.
3D Color
Management
See “3D Color Management” on page 39 for details.
Reset Picture
Setting
See “Resetting current or all picture modes” on page 40 for details.