Operation Manual

English
58
FUNCTION DESCRIPTION
4.SYSTEM SETUP: Basic menu
Operation
Settings
Direct Power On
When connecting the power cable, the projector is turned on
automatically.
Signal Power On
The default setting is that the projector is turned On automatically without
pressing POWER or when it is in standby mode and a signal exists in the
VGA or HDMI 1 cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is detected
after a set period of time.
Auto Hide Screen Picture
If you select On, the image is turned off automatically 3 minutes after the
projector has not received any signal. Press any key to cancel this function.
Blank Timer
Sets the image blank time when the Blank feature is activated, once elapsed
the image will return to the screen. See “Hiding the image” on page 41 for
details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 12 hours.
Remote
Receiver
Sets which IR remote sensor (front sensor or rear sensor) of the projector
will receive the signal from the remote control.
Panel Key Lock
Disables or enables all panel key functions except Power on the
projector and keys on the remote control. See “Locking control keys” on
page 42 for details.
Background
Color
Select the background effect when no signal is available.
Splash Screen
Allows you to select which logo screen will display during projector start-
up.