Operation Manual

English
61
FUNCTION DESCRIPTION
5.SYSTEM SETUP: Advanced menu
Network
Settings
Wired LAN
See “Control the projector via the wired LAN environment” on page 44
for details.
AMX Device Discovery
When AMX Device Discovery is On, the projector can be detected by
AMX controller.
MAC Address
Displays the mac address for this projector.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H.
Size, Projector Installation, Language, High Altitude Mode,
Security Settings and Baud Rate.
6.INFORMATION menu
Current
System Status
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the PICTURE menu.
Light Source Mode
Display current light source mode.
Resolution
Shows the supported resolution of the input signal.
3D Format
Shows the current 3D mode.
Color System
Display the format for entering data into the system: NTSC, PAL, SECAM
or RGB.
Light Source Usage Time
Display time of the light source used.
Firmware Version
Display the separation version of projector.
INFORMATION menu shows the current operation of projector.