• Slide Duration: To set the duration of each slide during playing. For example, 30 means each slide will played for 30 seconds. 8 Each slide allows only one image and one audio file. If you try to insert a second image or audio, an Out of range message will pop up. 3. After you finish all slides for a MMS message, press and choose from the following options: (Option) • Send: Send the message immediately. • Save to Draft: Store the message in Outbox. • Preview: Preview the message.
Cleaning Up Messages Go to menu: MMS > Cleanup. This option allows you to cleanup part of or all of the messages. The options for cleanup includes All, Inbox, All Read, Outbox, and Drafts. Settings Before you start to use MMS, go to menu: MMS > Settings to adjust the following settings: Filter Your phone will reject all MMS messages from the senders listed here. Expiry Sets the length of time your outgoing MMS message stays on the server before it reaches the recipient successfully.
Deferred Download After you activate this function, the phone will only download the information associated with the sender when it receives an MMS message. You can then decide whether to download this message's content after you have read the information related to the sender. Delivery Report Asks the recipient to return a confirmation after receiving your MMS message. Read Report Asks the recipient to return a confirmation after reading your message.
your nickname followed by your message as “nickname> message”. d.When the chat message is sent, press (Option) and then choose Send to enter another message. The message will automatically be sent to the same recipient. Repeat the same process to send more messages to the same person. 2. Alternatively, to start a chat session, you can select a message from Inbox, press (Option) and then choose Chat. Select a chat partner from the Nickname list and then press message and press to a chat. .
Leaving a chat session If you want to leave a chat session, press (back) or . This will take you back to the SMS Chat menu. You phone will keep the records of the last chat session. To resume the previous chat session, scroll to select Previous Chat. If you want to start a new chat, go to: SMS Chat → New Chat. When you are interrupted by an incoming call during a chat session 1. Answer the call. Upon ending the call, the display returns to the idle mode.
Cell Broadcast Cell broadcast messages are general messages that your network operator broadcasts to all phones within a particular area. These messages are broadcast in numbered channels. For example, channel 030 might be for local weather, 060 for traffic reports, 080 for information about local hospitals, taxis, pharmacies, and so forth. You can receive cell broadcast messages that your network operator broadcasts, and select your preferred topics and languages.
Memory Status Displays the amount of remaining available memory, including pictures, animations and ring tones stored on the phone.
Input Modes Changing the Text Input Mode When the display shows the editing screen, you will be able to see the name of the current text input mode in the upper right corner of the screen. Press The text input mode currently in use to change the input mode. The input mode icons (names) that may appear in the upper right corner of the screen represent the following input modes: Uppercase letters input mode. Lowercase letters input mode. iTap (predictive input mode) for uppercase letters.
Letter Input Mode (ABC) In this mode, press the key containing the desired letter repeatedly to scroll through the available characters in order until it is reached. How to use the letter input mode • You must press the key corresponding to the desired letter the correct number of times in order to enter the letter you want. Display letters for entry according to the order shown on each key.
How to use iTap • Press once the alphanumeric key corresponding to the first letter of the word you wish to enter without considering where that letter falls in the sequence of characters available through that key. Then press the key corresponding to the second letter, and so forth. The phone will predict which word you wish to enter based on the set of keys you have pressed. The predicted word will be shown in the lower left portion of the screen.
5. Since "GOOD" is not the word that you wish to enter, press display the next candidate word, "HOME". 6. Press to to place "HOME" into the message. Symbol Input Mode When editing messages, press bottom of the screen. Use to open the symbols field along the to move the selection box to the symbol you wish to enter, and then press to place it in the message text.
Direct Connection to URLs Your phone provides handy preset URL text hotkeys, enabling you to enter a complete URL more quickly and conveniently, and making Internet access more efficient and enjoyable. From the standby screen, you can rapidly key in numerical URLs. If, for example, you wish to enter "http://123.com" you need only key in "123" and then press . The full URL will appear on the screen. automatically adds the necessary "http://" prefix and the ".com" domain suffix.
• After you press to enter "http://" press to enter "/" and "-". For example, if after you enter "123" and then press once-causing "http://123.com" to appear on the screen-you press again, the URL will change to "http://123.com/". Pressing switch between "/" and "-". again will • When the screen shows the desired URL, press Internet and access this URL address.
Menus The phone's menus provide various features. The main menu consists of 9 icons. Each icon represents a particular menu item, which is used to access related sub-menus. For information about navigating menus, see page 15, "Menu Navigation". Phone Book This menu provides various functions for managing the Phone Book, including the ability to add, locate, and copy contact data; add contacts to a caller group; and so forth. Find Used to locate a contact in the Phone Book.
Edit After selecting a particular contact, you can follow the procedure described on page 26 for editing the data for this contact. Copy If you are using the phone book stored in the phone's memory, you can copy contact data to the SIM card's phone book, and vice versa. You can select a contact to copy from one phone book to the other, and copy all contacts in one phone book to the other by choosing the option All Phone to SIM (All SIM to Phone). Delete Deletes a contact from the Phone Book.
• Press : Allows you to view a list of all contacts that belong to the caller group. Press then press Add: to highlight the desired contact, and (Option) to access the following options: Add a contact to the caller group. Press to select a contact to add, and when finished press . Deletes the selected contact from the contact group. Delete: Business Card You can use this option to enter your own business card information. The data fields are as follows: Your name. Your mobile phone number.
My Number This option allows you to save your SIM card number and name to your SIM card's memory. Press (Option) and select Add to enter your name and number. When you are finished, press (Option) and then select Save to save your data. If you wish to edit the current name and number, press (Option) and select Edit to edit the currently selected data. Memory Status Shows you the entries that have been stored and the maximum entries that can be stored, on the SIM and on the phone.
Call Records 8 Your network operator must support this feature in order for you to be able to use it. This menu includes a list of your missed calls, dialed calls, and received calls. Call costs and time are also recorded. Missed Calls Shows your most recent missed calls. Press to scroll to the missed call that you wish to select. You can now choose to view, edit, or delete the number for the missed call. The procedure is the same as that described on page 32, "Last Missed, Dialed, and Received Calls".
Last Call Time Shows the duration of the last call. All Calls Time Shows the total time for all calls. Received Calls Time Shows the total time for all received calls. Dialed Calls Time Shows the total time for all dialed calls. Reset Clears all call time records. 8 You must enter your PIN2 code in order to zero call times. is a PIN2 code? / What • The PIN2 is the second PIN code. Its main use is in controlling restricted services-for example, call time limits and restricted phone numbers.
8 Requires the support of the network operator. Reset Clears all call cost records. 8 Requires entry of the PIN2 code. Call Cost Limit Shows the current limit set for total call costs. Set Call Cost Allows you to first enter the unit price and a currency for calculating call costs. 8 Requires entry of the PIN2 code. Messages For a description of the features available in the messages menu, see page 46, "Messages Menu".
Games Your phone provides a number of exciting games that you can use to entertain yourself when you have a spare moment. Games Cherry Boy This game contains five levels and in each level the player has three lives. To pass one level you must collect all the cherries before time is up, or you must obtain the key to the next level. If you bump into a monkey, you lose one life. Press begin a new game. Press to to scroll to the menu item you want.
Game controls Press or Press or a ladder. Press to move the player left or right. to move the player up or down on to pause the game. Press to split the path so the monkey will fall. The split will be reconnected in 5 seconds.
Eda Mouse This game contains eight levels and to pass each level player has to eliminate the fruit to a certain amount. You pass one level when your score has reached a thousand points. To eliminate the fruit, player has to arrange three identical fruit in a row. You lose the game when the fruit reach the eda mouse's head. Mixed sorts of fruit. Level The vertical dotted line indicates the path you aim at the target. Your score Press or to move the eda mouse left or right.
Camera The digital camera function you access through the main menu is the same as pressing (Camera) from the standby screen. For details on how to use the camera to take photos, see page 39, "Camera Function". Media Center Album This album stores the phone's default pictures, as well as images received in MMS messages, or photos taken using the camera on the phone.
Set Image ID: Set the current selected photo as a phone book contact's visual caller ID. When there is an incoming call from that contact, the phone's display will show this photo. •New Entry: Enables you to create a new contact in the Phone Book using the photo as her/his caller ID. •Exist Entry: Associate the current selected photo with a contact in the phone book entries. Set Wallpaper: Use the picture as the wallpaper for the standby screen. Send: Sends the picture in a MMS message.
Melody This ring tone library includes the phone's default ring tones, as well as ring tones received in messages, or downloaded through WAP services or using multimedia communications tools. The phone supports the following music file formats: MIDI, SMAF, and iMelody. Scroll to the desired ring tone, and press (Option) to perform the following tasks with the ring tone: Set Ring ID: Set the current selected ringtone for a contact.
• Details: Displays the name of the ring tone, its file size, and whether it is a default ring tone, or a file that you have saved or downloaded yourself (noted as User Defined). Cleanup All Deletes all the data stored in the media center. Memory Status Displays the amount of remaining available memory, including photos, images, and ring tones stored on the phone.
Tools Alarm If you activate the Alarm Clock feature, when the specified date and time arrive, the phone will sound the alarm, even if your phone is turned off. 1. Select the alarm you wish to set and press . 2. The status of the alarm will appear, press to set the alarm status on or off. 3. After your alarm is turned on, setting options appear as shown in the chart below: Switch the alarm on or off. Enter the time when an alarm will go off.
4. Lastly, you must press (Save)to save all your current Alarm settings. After completing Alarm settings, standby screen's status bar. will appear in the World Clock If during travel, you move between time zones, the phone will automatically adjust the time displayed on the screen based on the time zone prompts provided by the local network operator so that you always have access to accurate local time.
Calendar You can use the Calendar to set up memos for forthcoming events such as a meeting, an appointment, or a friend's birthday. The Calendar will also remind you about events you have previously scheduled. 1. When you open the Calendar, the phone will show the calendar for the current date. 8 If you have not set the current date on your phone, go the menu Settings → Date & Time. See page 101 .
Enter the end date of the event. Enter an end time of the event. This option allows you to set the time you want the reminder to remind you about the event. For example, if you want the reminder to sound 30 minutes before the meeting, chose 30 minutes to set the reminder to do so. This option allows you to set the reminder repeatedly to go off.
Calculator Allows you to use the phone as a calculator. Use to perform the mathematical operations shown on the screen. 8 You can enter numbers up to a maximum of 8 digits in length. Entered numbers and calculation results will appear in this field. Press to enter a decimal point. Currency Converter Below is a description of the Currency Converter screen: 1.
3. After returning to the Currency Converter screen, you can select one of the currencies and then enter an amount that you wish to convert into the other currency. 8 You can enter amounts up to six digits long. 4. After pressing the converted amount will appear in the field for the other currency. Stopwatch 1. Press to start the stopwatch. 2. While the stopwatch is running, you can press (Split) to save up four elapsed times (such as in a race).
Oper. Service Your phone includes a built-in WAP browser, allowing you to use the phone for mobile Internet connectivity. You can browse the online services offered by the network operator or ISP, such as information on financial news, sports, travel, and entertainment. To use the phone to get online, necessary WAP and GPRS settings must be made in this menu.
Start Browser Starts up the browser and connects to the homepage. Browsing a webpage Referring to the soft key commands at the bottom of the screen, press and to perform needed tasks while browsing a webpage. Press to scroll up or down a webpage. For details on browsing a webpage, inquire with the network operator providing WAP services. Your Internet connectivity service will determine the layout and content of the webpages you view.
Home Returns to the home page. To designate a particular page to be your home page, go to 9 Settings → 1 Homepage. Exit Closes the browser and returns you to the main menu screen. Inbox When your phone receives a message that can only be viewed using a WAP browser, you enter this WAP inbox to read the message. Bookmarks You can open the Bookmarks menu and select webpage bookmarks. View Allows you to see the current bookmarks and bookmarks folders.
Move to Folder: Moves a bookmark to the designated folder. Delete All: Deletes all bookmarks and book-marks folders. Hotkeys: Allows you set a numerical key as a hotkey for a bookmark. After completing the setting, you can press this numerical key to directly link to the webpage represented by the bookmark. Mark Site Adds the current webpage to your bookmarks list.
Homepage Designates a homepage. When you start up the WAP browser or if you select Home from the browser's menu, the screen will display the homepage you designate. a. Press (Edit) and then enter the URL of the webpage that you wish to use as your homepage. (Some WAP service providers do not allow users to set a homepage.) b. Select the Save option to designate the URL you entered as your homepage. Select Use Default to use the homepage designated by your WAP service provider.
Set Proxy Your phone can save the settings for six WAP proxy servers. You can select one of these proxy settings for use as a default so that your phone will connect to that proxy server when you begin an Internet session. You can also go to the menu Oper. Service → Wap Service → Wap Setting to select the server that you wish to activate. See page 97. Circuit Prompt The Circuit Prompt is a message displayed before each circuit data call is made. It reads, "Circuit is down.
Authentication You can decide whether your phone should store your user name and passwords for websites that require them. If you allow your phone to authenticate you automatically, you will not need to re-enter your user name and password each time you visit the same website. Advanced Restart Browser Restarts the browser, and automatically returns to the designated homepage.
WAP Message When you receive a new WAP message, the status bar will show the icon to remind you that you have an unread WAP message. Starts up the browser and displays the WAP inbox so you can read WAP messages. Goto URL Enter the URL of the webpage that you wish to browse, and then scroll to the Go option and press (Go) to link to that URL. Resume Returns to the last webpage you viewed.
By scrolling to a particular group of WAP server settings that you wish to modify, and then pressing (Option), you can create a new group of settings, edit the settings, or delete the settings. WAP server settings include the fields listed below. Press (Edit) to edit the setting in each field. When you are finished with the settings for all fields, you must press in order for this group of WAP server settings to be saved. • Profile Name: Gives the WAP server settings a name.
CSD/GPRS: Use the dialup network preferentially. Only if there is no dialup network will the GPRS network be used. CSD: Use only the dialup network. network is a GSM Circuit Switch Data Service (CSD / Afordialup short). Using a dialup network can be likened to using a home computer's modem, in that before connecting to the Internet a number must be dialed. As for GPRS, it like the LANs used at company, where users do not need to dial a number to access the network.
Line Type: This is the type of dialup connection. Press to select. Baud Rate: The default value is 9600, which is the standard speed for data connections with a GSM mobile phone. Auth Type: This is information needed for telecommunications protocol authentication. Clear Cache Clears webpage content that the browser temporarily stores in memory. Clear URLs Clears URL strings that the browser temporarily stores in memory. STK Your network operator provides this STK (SIM Tool Kit) menu.
Settings Date & Time Used to set the time and date, as well as the format in which the time and date will be displayed on the startup screen. Press settings. to save the Date Enter the date using appropriate number keys. Time Enter time using appropriate number keys. Format This option is used to decide the format in which the time and date will appear in the standby screen. Auto Power On/Off Designates a time for the phone to be automatically turned on or off.
Power Off When you see Status Off displays on the screen, press and choose the On option, scroll to Time and then enter a time you wish the phone to be auto turned off. Profiles A profile is a group of settings that determine whether the phone will alert you to incoming calls through a ring tone or a vibrating alert, and how ring tones in general are used on the phone. These settings allow the phone's operation to best suit the environment you are in. 1.
Outdoors The options in this profile have been preset to suit an outdoor activity (for example, use of the highest ring tone volume, activation of both ring tone and vibrating alerts, and use of keypad tones). Once this profile is activated, the LCD display's status bar will show the . Handsfree This profile is only active when a hands-free kit is attached to the phone. Once this profile is activated, the LCD display's status bar will show the icon.
• Ring Only: When there is an incoming call, the phone will use a ring tone but no vibrating alert. • Vibrate Only: When there is an incoming call, the phone will use a vibrating alert but no ring tone. • Ring & Vibrate: When there is an incoming call, the phone will use both a vibrating alert and a ring tone. • Vibrate then Ring: When there is an incoming call, the phone will first use a vibrating alert and then a ring tone. Call Ring Your phone includes various types of ring tone melodies.
• Any Key: Allows any key except to be used to answer an incoming call. In this mode, is used to reject an incoming call, and not to answer. • Automatic: If the Automatic answer mode is activated, the phone will ring for five seconds, and then the incoming call will be automatically answered (only the Handsfree profile allows this setting). Rename Allows you to provide a new name for the profile (only available for the Personal profile).
• Image: Press (Edit) to enter the image library. Only the image selected in this option will be displayed when the phone is turned on. After selecting an image, you will need to select the desired music to be played when the phone is turned on. Select Silent if you do not wish any music to be played. • Photo: Follow the same steps as selecting images. • Text: Press (Edit) to input the text. Only the text entered in this option will be displayed when the phone is turned on.
Audio This menu allows you to set various sounds that the phone uses. 8 Some of the options provided in this menu and the Profiles menu are identical (for example, Call Ring). Therefore the particular setting that the phone uses will depend on which menu you last used to make the setting. Call Settings Answer Mode • Any Key: Allows any key except to be used to answer an incoming call. In this mode, is used to reject an incoming call, and not to answer.
Off: Your phone number will not be shown on the recipient's phone. 8 If this feature is turned off, you may not be able to make phone calls in certain countries, such as Singapore and China. Preset: Whether your phone number will be displayed on a recipient's phone will be determined by the default set by the network operator. Call Divert 8 Requires the support of the network operator. Forward All Forwards all incoming calls to a designated phone number or voicemail inbox.
Call Barring You can request that your network operator block the dialing or receiving of certain calls. The call barring services below require the support of your network operator. To activate or cancel any of the options below, you must enter the network password provided by the network operator. All Outgoing Blocks dialing of any calls from the phone. Intl. Out If this option is activated, no international calls can be made with your phone. Intl.
Call Waiting If there is an incoming call when you are in the middle of another call, the screen will display the number of the incoming call and call waiting message to alert you. You can activate, cancel, or view the status of this feature from this menu. 8 You must apply to the network operator for the call waiting service in order to use this feature. Auto Redial If there is no answer at a number you have dialed, the phone will automatically redial.
Active Line This feature allows you to use two different phone numbers on one phone. You can designate one number for dialing calls, while accepting incoming calls dialed to both numbers without needing to use two phones. Select either Line 1 or Line 2. The number you select ( or ) will appear on the standby screen. 8 This feature requires the support of the network operator. User Group User Group Used to create a closed group of callers based on a service provided by the network operator.
your regular network in your home country or when abroad, you can manually select the local network system. 8 Your network operator must be able to support network selection in order for you to use this feature. Network Mode You can choose whether the network selection mode that the phone will use when it is turned on is automatic or manual. Automatic: If this option is selected, when outside the coverage of your regular network, the phone will automatically search for usable networks.
Service Tone Used to set whether the phone will sound when it detects an available network. Security You can use a PIN code, phone password, and SIM card lock authentication to prevent unauthorized use of the phone. PIN Code A PIN (Personal Identification Number) code is a password provided by a network operator. When PIN code authentication is activated, it will prevent unauthorized use of the SIM card.
Phone Lock Activates/deactivates or changes the phone's startup password. The startup password prevents unauthorized persons from using your phone. Once the phone's password is activated, the phone will be locked down when it is turned on unless this password is correctly entered. If an incorrect password is entered, your phone will remain locked down, and cannot be unlocked even if the SIM card is replaced by another one. When the phone is locked, you will only be able to make emergency calls.
Before setting the SIM Lock feature, you must enter the previously set SIM Lock password (the default SIM Lock password is 1234). The password must be between 4 and 8 digits in length. Screen Lock Used to create a security screensaver. When you have not performed any tasks with the phone for a set period of time, the phone will automatically activate the screensaver shown on the right.
Input You can set the default input mode that will be automatically activated whenever you open the editing window for entering information into a message, the Phone Book, and so forth. Restore Restores all of the phone's settings to their factory defaults.
Care and Maintenance Take note of the points noted below to ensure that you are using the phone properly and to extend the lifespan of the phone. • Store the phone and its accessories out of the reach of children. • Keep the phone and accessories dry, and use the phone in environments where the temperature is between -10 °C and 45 °C. High or low temperatures outside this range may damage the phone. • If possible, do not use or store the phone in excessively dusty or dirty environments.
Troubleshooting If you encounter problems while using the phone, or if it performs erratically, you can consult the information in the chart below. If your particular problem cannot be resolved using the information in the chart, contact the dealer where you purchased the phone. Problem Possible cause Solution • The network signal is too Move to a location where the weak at your current network signal can location — for example, in properly received.
Problem Possible cause • The standby time is related to your network operator's system configuration. The same phone used with different network operators' systems will not provide exactly the same length of standby time. Shortened standby time • The battery is depleted. In Use a new battery. high-temperature environments, battery life will be shortened. • If you are not able to connect to the network, the phone will continue to send out signals as it attempts to locate a base station.
Problem Possible cause • SIM card invalid. Unable to connect to the network. • You are not within the Check the service area with network's service area. • Poor signal. You cannot answer incoming calls. Solution Contact your network operator. your network operator. Move to an open space, or if you are inside a building, move closer to a window. • You have activated the Go to the menu Settings → Call Barring feature. Call Settings → Call Barring, and then select Cancel All.
Problem Unable to enter information into the Phone Book. Unable to select certain features. Possible cause • The Phone Book's memory is already full. Solution Delete unnecessary data from the Phone Book. • Your network operator Contact your network does not support these operator. features, or you have not applied for services that provide these features.
122 Troubleshooting
