BenQ M580 Mobile Phone User’s Manual
Copyright © 2005. BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Safety Information For your safety, please read the guidelines below carefully before you use your phone: Exposure to Radio Frequency Signals Max. SAR measurement EU: GSM900: 0.345 W/Kg; DCS1800: 0.256 W/Kg. USA: PCS1900:0.622 W/Kg (head); 1.291W/Kg (body). Your wireless handheld portable telephone is a low power transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.
Specific Operating Restrictions No metallic component allowed in body-worn accessories. Antenna Care Use only the supplied or approved replacement antenna. Unauthorized antennas, modifications or attachments may damage the phone and violate GCF regulations. Phone Operation • Normal Position: Hold the phone as you would with any other telephone. • To avoid potential RF interference, please do not wear the phone around your neck or in front your chest for long hours.
Driving Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please: • Give full attention to driving--driving safety is your first responsibility. • Use hands-free operation, if available. • Pull off the road and park before making or answering a call if driving conditions so require. Electronic Devices Most modern electronic equipment is shielded from RF signals.
Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Areas with a potentially explosive atmosphere are often, but not always clearly marked. They include fueling areas such as gasoline stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.
European Union Directives Conformance Statement This device complies with the OJ-Directive as below: Electromagnetic Compatibility Directive (89/336/EEC), Low Voltage Directive (73/23/EEC) And R&TTE Directive (99/05/EEC). And also complies with the standard: 3GPP TS 51.
Table of Contents 1. Safety Information.......................................................... i 2. Preparing Your Phone For Use................................... 1 Inserting a SIM Card ............................................................ 1 Installing the Battery ............................................................ 2 Installing the Back Cover ..................................................... 2 Charging the Phone..............................................................
Listening to Voicemails..........................................................15 Operations During a Call.......................................................15 Phone Book......................................................................... 20 Adding Contacts to the Phone Book.....................................20 Finding Contacts in the Phone Book ....................................22 Last Missed, Dialed, and Received Calls............................ 23 Using the Silent Profile...............
Using Bluetooth.................................................................. 44 Turning Bluetooth On ...........................................................44 Adding a Bluetooth Device to Your Phone...........................45 Establishing Connection with Your Bluetooth Headset ......46 Sending an Item Using Bluetooth .........................................46 Organizing Your Bluetooth Devices......................................46 5. Menus ......................................................
JavaURL ..................................................................................52 All Games................................................................................52 Settings....................................................................................52 Camera ................................................................................ 52 Media Center ...................................................................... 53 Images ..............................................
Service Number ......................................................................63 STK Menu...............................................................................63 Settings ................................................................................ 64 Date & Time ...........................................................................64 Auto Power On/Off................................................................64 Profile...........................................................
xii Table of Contents
Preparing Your Phone For Use Inserting a SIM Card 1. Slide the SIM card into the SIM card slot, with the SIM card's metal contacts facing downwards and the cut corner at the top right. SIM card A SIM card can be easily damaged if its metal contacts become scratched. Therefore, take special care when holding or inserting it. To remove the SIM card, you must first press down the stay, then push the SIM card out of the slot.
Installing the Battery With the battery's metal contacts facing downwards, align the protruding tabs on the end with the holes in the battery bay. Then push the battery toward the end of the bay to insert the battery's tabs into the holes. Press down to click the battery into place. Do not remove the battery when the phone is on. Doing so could cause you to lose personal settings or data stored either on your SIM card or in the phone's memory.
Charging the Phone 1. Insert the charger connector deep into the charger socket at the bottom of your phone. Ensure that the connector is plugged in the right direction with the side showing arrow icon or "up" facing upwards. 2. Plug the charger into a power outlet. Do not remove the battery while the phone is charging. 3. Once the phone is fully charged, remove the charger from both the power outlet and the phone. Please note: • It takes approximately 4 hours to fully charge a battery.
Turning the Phone On 1. Press and hold to turn the phone on. The phone will display the welcome animation. 2. Enter your PIN code and press to confirm. The PIN (Personal Identification Number) is the password provided by your network operator. You need this password in order to use the SIM card. If you enter the PIN incorrectly three times in a row, the SIM card will be locked. You must now enter the PUK (Personal Unblocking Key) for that SIM card in order to unlock it.
Getting to Know Your Phone Your Phone at a Glance Front and side views Front Camera Sub display Bluetooth hot key Speaker Hands-free headset / Data cable jack Charger socket Getting to Know Your Phone 5
Front open view Earpiece Main Display OK key Left soft key Dial/Answer key Camera hot key Scroll key Right soft key Power on/off key Alphanumeric keys Microphone 6 Getting to Know Your Phone
Sub Display When the flip is closed, the sub display's status bar will show icons for network strength, battery power, the current time and the current profile in use. The sub display will also alert you to incoming calls, new messages and missed calls. Idle Screen Status bar Name of network operator Press to enter the Press indicated function. to enter the main menu. Press to enter the indicated function. • To set the wallpaper of the display, go to Settings > Display > Wallpaper.
Icons in the Status Bar Icon Function Description Signal strength Signal strength of the network. The more bars indicated, the stronger the signal. Battery status Shows the current level of battery power. The more bars indicated, the more power remains. GPRS in use Appears when GPRS has been activated. Bluetooth Appears when Bluetooth is turned on. Message Appears when you have new or unread messages. Appears in red when your messages are full.
Icon Function Outdoors Silent Description Shows that activated. the Outdoors profile is Shows that the Silent profile is activated. Personal Shows that the Personal profile is activated. Headset Appears when a headset is connected to the phone. Divert Roaming Appears when the call divert is activated. Roaming is activated (not your regular network).
Using the Keys in Idle Mode In this user manual, "long-press" means to press and hold down a key for about two seconds. "Press" means to press a key and release immediately. Key Commands and functions Power on/off key • Long-press to turn the phone on or off. • Press this key to end a call, reject an incoming call, or to cancel a dialing. Send/Answer key • Press to send or answer a call. • Press to access the call record list. Left soft key • Press to perform the function indicated on the display.
Key Commands and functions Scroll key • Press to access Shortcuts. • Press to access Profiles. • Press to access Camera Photos. • Press to create a new SMS. Camera hot key • Press to activate the camera mode. Asterisk key • Press this key to enter an asterisk " * ". • To make an international call, long-press this key until the display shows "+", then enter the recipient's country code, area code and phone number. Voicemail key • Long-press to dial your voicemail number.
Menu Navigation 1. In idle mode, press to bring up the main menu. 2. Use the scroll key to move up, down, right or left through the menu, for example, scroll to Settings, and press to enter its menu. 3. Use the scroll key to scroll to a submenu, for example Profiles, and press to enter the submenu item. You can also access a menu item by pressing the corresponding menu number. In the above example, press 12 Getting to Know Your Phone to access Profiles.
Using Your Phone Call Functions Making a Phone Call In idle mode, enter the phone number. Press to dial your call. Ending a Phone Call To end a call, press or close the flip. The display will show the total call time, and then return to idle mode. Answering a Phone Call To answer a call, press . Or, open the flip. If you wish to change the way of answering a call, go to Settings > Call Settings > Answer Mode.
Adjusting the Volume During a call, if you want to adjust the speech volume, you can press or . Please note: Adjusting speech volume works during a call or when dailing. Making an International Call 1. Enter the outgoing international call code, or long-press until "+" appears on the display. 2. Enter the recipient's country code, area code and phone number. Dial the call by pressing .
Listening to Voicemails Long-press your voicemails. to dial the voicemail phone number and listen to Please note: • If the network vendor supports it, the voicemail icon will appear on the display when you have new voicemails. • If the voicemail number is not stored in the memory, you will not be able to access your voicemail by long-pressing . In this case, you will need to manually set the number by going to Messages > Voicemail > Set Number.
a. Press b. Press (Unhold) to resume the call. to end this call. • When there is an active call and a call on hold. a. Press (Swap) to resume the call that is on hold, and put the active call on hold. b. Press to show a list of calls that you can end. Making a Second Call* Enter a phone number, or select one from the phone number or call record, and then press to dial it. The currently active call will automatically be placed on hold.
Call Menu If you press during a call, it will bring up a call menu which provides a number of functions during a call. Items marked with an asterisk (*) depend on network support and may require a subscription. Use Loudspeaker/Mute Speaker Allows you to turn on/off the loudpeaker. Use Headset Allows you to search for a bluetooth headset device. Phone Book Allows you to search for a contact in the phone book. Call Records Allows you to view missed, received, and dialed calls.
Forward Allows two parties to connect, while ending one's own call (one of the two parties may be involved in an active call while the other is either on hold or being dialed), so as to allow the two parties to have their own call. Send DTMF When the phone is connected with other devices or services, you can send DTMF (Dual Tone Multi-Frequency) strings. DTMF strings are keypad tones that can be sent via the microphone as you dial another number.
Mute/Unmute Activates/cancels the silent mode. SMS Allows you to read or write an SMS message duing a call. For details, see page 30, "SMS".
Phone Book Adding Contacts to the Phone Book You can store up to 500 entries in the phone memory. The capacity of a phone book on your SIM card depends on the type of SIM card provided by your network operator. 1. In idle mode, enter the phone number to save, then press (Save). 2. Select the memory where the contact is to be stored, Add to SIM or Add to Phone. 3. Scroll to the data field that you want to edit, and then press to enter data.
Contact data fields on SIM card memory: Name Number Caller Group The contact's name. The contact's phone number. Used to select a caller group for the contact. To define a ring tone and image for each caller group, go to Phone Book > Caller Group. See page 48. Contact data fields on phone memory: Name The contact's name. Mobile Number The contact's mobile phone number. Home Number The contact's home number. Email Caller Group The contact's email address. Used to select a caller group for the contact.
Company Department Position Note Special Day The contact's company name. The contact's department name. The contact's position. Used to edit notes for the contact. Used to enter a special date for the contact. Used to set a ring tone for the contact. When there is an incoming call from the contact, the phone will play this ring tone. Ring ID A ring tone set in this field will replace the one associated with the contact's caller group, if any.
• If necessary, scroll to the contact you want. The icon in the status bar appears differently according to the memory, SIM or phone, that the contact is saved to. 2. When you have found the contact you want, you can • Press to dial the number. If the entry has more than one phone number, then you will be prompted to select a number. • Press (Option) to access a list of options including Add, Edit, Copy to Phone/SIM, Delete, and Send vCard (By SMS or By Bluetooth).
The icon will appear beside missed calls; the icon beside dialed calls; the will appear will appear beside received calls. Scroll to the number you want and then you can • Press • Press to call back. (Option) and select your desired function. Using the Silent Profile In idle mode, you can long-press to activate the silent profile. Once it is activated, the phone will alert you to an incoming call by vibrating without ringing. 1.
Camera Your phone features a digital camera that allows you to take a picture, and then set it as an image ID or wallpaper. You can also send the picture in a MMS message, or send it to another device through Bluetooth. Taking Pictures 1. Press to activate the camera mode. 2. The viewfinder is then displayed. 3. To adjust various camera settings, press (Option) to bring up the setup menu. For details, see page 26, "Camera Setup". The LCD icons will change according the settings you made.
Camera Setup Press (Option) to bring up the setup menu as follows: Name Image Size Functions Allows you to set the desired image size. Scene Enables you to load preset settings that best suit the environment you are in. Effect Enables you to appy a special effect or color to your picture to create an artistic style. Shooting Mode Allows you to take a single shot or consecutive shots. Exposure Value Allows you to adjust the exposure value from +2 to -2.
LCD Icons on the Camera Viewfinder Image Size Icon Mode 640 x 480 320 x 240 256 x 320 128 x 160 The settings of 320 x 240, 256 x 320 and 128 x 160 support consecutive shooting. To take consecutive shots, set the appropriate image size, then go to Option > Shooting Mode, select 9 MultiShot.
Icon Mode Indoor Shooting mode Icon Function 1 single shot consecutive shots Managing Your Pictures After taking your picture, press (Option) to select from one of the following: • Send: Allows you to send the picture by MMS or by Bluetooth. See page 34, "Creating a New Message" and page 46, "Sending an Item Using Bluetooth". • Set as: Allows you to set the picture as a wallpaper or a caller image. • Slideshow (available only when consecutive shots are taken): Shows the 9 multishots as a slideshow.
Shortcuts Allows you to assign 8 alphanumeric keys as shortcuts to commonly used functions or frequently dialed numbers. is assigned to voicemail dialing and you are not allowed to change it. In idle mode, press to enter Shortcuts. The numbers 2 to 9 displayed represent the corresponding 8 alphanumeric keys on the phone. Setting Shortcuts Shortcuts allows you to set up quick access functions or phone numbers. 1.
6. To cancel a shortcut key, scroll to the shortcut key that you want to cancel, and then press (Option). Select Delete to cancel the shortcut. Using Shortcuts There are two ways to use shortcuts: 1. In idle mode, long-press an alphanumeric key to access its assigned shortcut. 2. In idle mode, press to enter Shortcuts. You can then: • Scroll to move the selection box to the icon corresponding to the desired key. Then press to access its assigned shortcut.
2. To read the message, press . To manage the message, press (Option). For details about managing received messages, see page 32, "Managing Inbox". Creating a New Message 1. To bring up the message editing screen, press in idle mode, or go to Messages > SMS > New. Use the alphanumeric keys to enter text. For information about the input method, see page 41, "Input Methods".
2. When you have finished editing the text, press and select Send Message. 3. Enter a phone number directly or press (Browse) to select a contact from your phone book. 4. Scroll to the desired contact and press to select. Press (Done) to confirm selection. 5. Press to send. Managing Inbox Your phone saves incoming messages in the Inbox. To manage Inbox messages, go to Messages > SMS > Inbox. A list of messages received appear. To view a message, scroll to it and press Press .
Managing Sent Items Sent folder preserves messages that were successfully delivered. To manage Sent messages, go to Messages > SMS > Sent. To view a message, scroll to it and press . Press (Option) and select your desired function. Managing Drafts Drafts folder contains messages that you chose to save. To manage drafts, go to Messages > SMS > Drafts. To edit a message, scroll to it and press . Press (Option) and select your desired function.
MMS In order to use MMS, you have to subscribe to both GPRS and MMS services provided by your operator. Contact your operator for details on MMS settings. Downloading New Messages If you set MMS > Settings > Deferred Download on, the operator will send you a new message notification and will not download the message. Press if you wish to download the message. Reading a Message Having successfully downloaded the MMS message, the display will automatically switch to Inbox, press message page by page.
• Remove Text: Removes the texts in the page. • Remove vCard: Removed the vCard inserted in the page. • Remove vCal: Remove the vCalendar inserted in the page. • Remove Page: Removes the current page. • Previous/Next Page: Go to previous or next page. • Page Duration: Sets the length of time that each page is displayed when playing the message. • Spell: Opens the spell check box to allow you to create your own word into the dictionary.
• Content: Contains the message that you created. • Cc: Allows you to send the message as a carbon copy to others. • Bcc: Allows you to send the message as a confidential carbon copy to others. • Priority: Allows you to set the priority for this message. • Receipt: Allows you to set if a confirmation is to be sent back to you when the message has been delivered, read, or both. 3. Press (Option) and select Send Message to send the message. Managing Inbox Your phone saves incoming messages in the Inbox.
Managing Sent Items Sent folder preserves messages that were successfully delivered. To manage Sent messages, go to MMS > Sent. To view a message, scroll to it and press . Press (Option) and select your desired function. Managing Drafts Drafts folder contains messages that you chose to save. To manage drafts, go to MMS > Drafts. To edit a message, scroll to it and press . Press (Option) and select your desired function. Managing Private Folder Go to MMS > Private Folder.
Expiry Sets the length of time your outgoing MMS message stays on the server before it reaches the recipient successfully. Reply Type You can determine here whether you want to use an SMS message or MMS message in reply to an MMS message you have received. Size Limit Sets the maximum size for a message that the phone receives. If an incoming message exceeds this size, the phone will not be able to download that message. Server Info Activates the MMS server used for sending and receiving MMS messages.
Voicemail Get Voicemail Dials the voicemail number provided by your network operator to access your voicemail box. In idle mode, long-press to access your voicemail box. Set Number Allows you to save your voicemail phone number.
Cell Broadcast Cell broadcast messages are messages that your network operator broadcasts to all phones within a particular area. These messages are broadcasted in numbered channels. For example, channel 030 might be for local weather, 060 for traffic reports, 080 for information about local hospitals, taxis, pharmacies, and so forth. You can receive cell broadcast messages that your network operator broadcasts, and select your preferred topics and languages.
Input Methods When an editing screen is displayed, the current text input method is indicated in the upper right corner of the screen. The phone has the following input methods. Multitap text input T9 text input Numeric input Changing the Input Method When an editing screen is displayed, repeatedly press until your desired input method appears. Shifting between Upper and Lower Case Letters When an editing screen is displayed, long-press to shift between lower and upper case letters.
• When you have entered a letter and wish to enter the next letter, either wait for two seconds until the cursor moves to the next text entry position, or immediately press the key for the next letter. • Short press Long press to enter a space before beginning a new word. to feed a new line. • While entering text, use the scroll key to move the cursor. Press (Clear) once to delete a character; long-press (Clear) to delete all entered text.
• If you do not find the word you want in the list of candidate words, that means the word you intend to enter is not a valid word in the dictionary. Press (Spell) to open the spell check box, which allows you to create your own word into the dictionary. The next time you enter the word, it appears as one of the candidate word. • Once the correct word is highlighted or is entered, press to enter the word. • Short press press to enter a space before beginning a new word. Long to feed a new line.
• T9 Settings: Enable Choice List to show the list of candidate words (if they were once entered) when you enter letters. Enable Auto Completion to complete the predicted word (if it was entered before), and use the scroll key to display alternative words. Numeric Input The numeric input method allows you to use the alphanumeric keys to to enter numbers. Entering Symbols To open the symbol table, press . Press again to open the next page. Use scroll key to highlight the desired symbol.
• Press the Bluetooth hot key on the right side of your phone to bring up a trusted device list in which all the once paired devices are listed. Select a device to connect to and press Connect and press (Option). Select . The connection will be successful if the selected Bluetooth device is available at that time. If the list is empty, see below about how to add a Bluetooth device to your phone. Adding a Bluetooth Device to Your Phone 1.
Establishing Connection with Your Bluetooth Headset 1. Go to Tools > Bluetooth > Turn On to turn on the Bluetooth. 2. You will be asked to search and to add Bluetooth devices, press (Yes) to begin searching. Make sure that your Bluetooth headset is switched on and is in "pairable mode". 3. When a list of devices appear on the screen, select a device to connect to and press . 4. When a message pops up, press (Yes) to connect. 5. Enter the Bluetooth headset passkey and press .
Menus The phone features various functions and they are organized in the menus and sub-menus. The main menu consists of nine categories. Each category has related sub-menus. For information about navigating menus, see page 12, "Menu Navigation". Phone Book Find Used to locate a contact in the Phone Book. Enter the first letter to view a list of contacts begin with the letter. Scroll to the contact you want to find.
Delete Deletes a contact from the Phone Book. You can delete one contact at a time, or delete all contacts at once. Caller Group Caller groups are combinations of phone settings used to identify a particular group of contacts. Press (Option) to select the ring or image that a particular caller group belongs, or to rename the caller group. Privacy Manager This option allows you create a list of calls that you wish to accept(Accept List) or a list of calls that you wish to reject (Reject List).
2. Press (Option) and select Save to save all the entered data. Select Send vCard > By SMS to send the vCard in a short message. Select Send vCard > By Bluetooth to send the vCard using Bluetooth. See page 46, "Sending an Item Using Bluetooth". My Number This option allows you to store your phone number and name. Memory Status Shows you the number of entries that have been stored and the maximum entries that can be stored, on the SIM and on the phone.
Calls This menu includes a list of your missed calls, dialed calls, and received calls. Call costs and time are also recorded. Missed Shows your most recent missed calls. See page 23, "Last Missed, Dialed, and Received Calls" for details. Received Shows your most recent received calls. See page 23, "Last Missed, Dialed, and Received Calls" for details. Dialed Shows your most recent dialed calls. See page 23, "Last Missed, Dialed, and Received Calls" for details.
Received Shows the total time for all received calls. Dialed Shows the total time for all dialed calls. Reset Resets all call time records. Cost The cost calculation requires the support of the network operator. Last Shows the cost of your last call. All Shows the total cost of all calls. Reset Resets all call cost records. Requires entry of the PIN2 code. Limit Shows the current limit set for total call costs. Settings Allows you to set the unit price and a currency for calculating call costs.
Games Your phone features a number of entertaining applications and games. You can play the games that embedded in the phone, or download Java applications directly to your phone. JavaURL Starts up the browser and connects you to the Java download page. All Games Embedded games and downloaded Java games are stored in this menu. To find out how to play these games, please read their on-screen instructions.
Media Center Images Images stores built-in images, photos taken by the phone's camera, or images that you download to the phone. Images contains three folder by default. Camera Photos Photos that are taken by the phone's camera are stored in Camera Photos. 1. Scroll to the desired photo. 2. Press to display the selected photo. Scroll up or down to display the next or previous photo. 3. Press (Option) to perform the following: • Send: Select By MMS to send the photo in a MMS message.
Default Built-in images on your phone are stored in Default. 1. Scroll to the desired image. 2. Press to display the selected image. Scroll up or down to display the next or previous picture. 3. Press (Option) to perform the following: • Send: Allows you to send the image in a MMS/SMS message. • Set as: Allows you to set this image as a wallpaper or as an image caller ID for a specified contact or a new entry. • Details: Shows details of the image.
• Set as: Allows you to set this rintone for incoming calls or as a ring ID for a specified contact or a new entry. • Details: Shows details of the ringtone. Non-Forward If you download a file that has copyright protection, the file will be saved in Non-Forward folder. Copyright protection may prevent the files from being transferred or forwarded. Others Files that are not supported by your mobile phone are stored here.
Tools Alarm To set an alarm, follow the steps below: 1. Select an alarm and press . 2. Scroll to right to turn the status on. 3. Scroll to an option and change the setting as needed. Frequency Allows you to select the days you want the alarm to sound. Time Allows you enter the time for the alarm to sound. Time Duration Allows you to set the length of the alarm. Alarm Tone Allows you to set the ringtone of the alarm. 4. To save all your current alarm settings, press 5.
Bluetooth For information about using Bluetooth, see page 44, "Using Bluetooth". World Clocks This feature displays current local time and date for major cities around the world. To make use of the World Clocks feature you must set your phone's time and date correctly. To do this, go to Settings > Date & Time. To decide which cities’ time and date you want to display: 1. Press 2. Press press (Edit) to bring up a list of cities. to mark the cities. To unselect a city, scroll to that city and . 3.
3. Edit the data fields in the event editor as needed. Press (Save) to save the event. 4. To auto delete the events, press (Option) and select Delete After. Select the timeframe you want the deletion to be auto executed. 5. To send a event in a SMS message, select a prefered event and then press (Option) to select Send vCal > By SMS. To send a event to another Bluetooth device, select Send vCal > By Bluetooth. See page 46, "Sending an Item Using Bluetooth".
Note Note allows you to write down quick notes. You can set a password protection for the notes. The default phone code is 1234. To change the phone code, go to the menu Settings > Security > Phone Lock. See page 75. Shortcuts For information on Shortcuts, see page 29, "Shortcuts". Calculator Allows you to use the phone as a calculator. 1. Enter numbers using alphanumeric keys. 2. Use the scroll key to perform calculations.
(Option) and select Rate Setting. 2. To set the exchange rate, press 3. Enter the amount of currency, the result will appear in the other currency field. Stopwatch Stopwatch allows you to measure times for sports game. 1. Press to start the stop watch. 2. While the stopwatch is running, you can press (Split) to save each elapsed time. 3. Press to halt the stopwatch. 4. Scroll to view the list of elapsed times. 5. To reset the stopwatch, press (Reset).
Services Your phone features a WAP browser, allowing you to use the phone for mobile Internet connectivity. You can browse the online services offered by the network operator or ISP, such as information on financial news, sports, travel, and entertainment. To use the phone to get online, necessary WAP and GPRS settings must be made. To activate the mobile Internet connectivity, consult your network operator for WAP and GPRS services.
Ending the online session While online, long-press to close the browser and return to the idle mode. WAP Message When you receive a new WAP message, will be shown on the display. This option will start up the browser so you can read the WAP message. Go to URL Allows you to link to the URL you enter. WAP Settings Allows you to configure settings for different network operators' WAP servers, and then select the desired server to get online. 1. Scroll to the desired server and press (Option). 2.
• NAP If you are using a GPRS network, choose to configure GPRS NAP settings or CSD NAP settings and select either type of settings to get online. If you are using a dialup network, you are restricted to configuring only the CSD NAP settings to connect to the Internet. For detailed information on how to properly configure GPRS and CSD settings, contact your network operator. 3. Press and press (Save) to save the settings. 4.
Settings Date & Time Allows you to set the time and date, as well as the format that will be displayed on the screen. Date Allows you to set today's date. Time Allows you to set the current time. Format Allows you set the format in which the date and the time will be displayed. Time Zone Allows you to select a time zone where you are at. Auto Time Zone When turning this feature on, the time displayed on the phone will auto switch to the local time where you are at.
1. Select Power On or Power Off. 2. Scroll to turn the status on or off. 3. If status is set to On, specify a time. Profile A profile is a group of settings that determine whether the phone will alert you to incoming calls through a ring tone or a vibrating alert, and how ring tones in general are used on the phone. These settings allow the phone's operations to best suit the environment you are in. 1. Scroll to the desired profile and then press the joystick to activate this profile.
Personal Allows you to use this profile for a group of custom settings. 2. To customize settings, scroll to a profile, and then press (Edit). You can not modify settings in Silent mode and in Airplane mode. Vibrate Decides whether the phone will vibrate when there is an incoming call. Call Ring Allows you to set the ringtone that will sound when there is an incoming call. Message Tone Allows you to set the ringtone that will sound when there is a new message.
Restore Allows you to reset the profile to its default configuration. Requires entry of the phone code. Display Theme You can change the appearance of the display. Select different themes to change the display color and background. Wallpaper Designates the wallpaper used for the standby screen. Welcome Message Allows you create a welcome message to be displayed when the phone is turned on. Personal Banner Allows you to enter text to be displayed on the standby screen.
Audio Call Ring Allows you to set the ring that will sound when there is an incoming call. Message Tone Allows you to set the ring that will sound when there is a new message. Calendar Tone Allows you to set the ring that will sound when your calendar event approaches. Keypad Tone Decides whether keypad will sound when keys are pressed. Ring Volume Allows you to adjust the ring volume. Scroll up or down to adjust it. Speech Volume Allows you to adjust the speech volume. Scroll up or down to adjust it.
Call Settings Answer Mode Flip Answer Allows incoming calls to be answered by flipping open the phone. Send Key Allows incoming calls to be answered only by pressing . Any Key Allows any key except to be used to answer an incoming call. Automatic Allows incoming calls to be answered automatically when the headset is plugged in. Connect Alert This feature allows the phone to ring, vibrate, or flash the backlighting when the recipient of a call has answered.
Call Divert This feature allows you to divert calls to a designated phone number or voicemail box. Requires the support of the network operator. Forward All Diverts all incoming calls. When Busy Diverts incoming calls when you are in the middle of another call. No Reply Diverts incoming calls when you do not answer. Not Reachable Diverts incoming calls when your phone is turned off or outside network coverage. Cancel All Cancels all call divert options.
Intl. Out If this option is activated, no international calls can be made with your phone. Intl. Except Home If this option is activated, your phone can only be used to dial local calls and calls to your home country from abroad. Other international calls will be barred. All Incoming Rejects all incoming calls. Incoming When Roaming If you are in another country (using roaming), activating this option will cause the phone to reject all incoming calls. Cancel All Cancels all call barring settings.
Auto Redial If there is no answer at a number you have dialed, the phone will automatically redial. Fixed Dialing Num. After this feature is activated, the phone will only be able to dial numbers on the Fixed Dial Number list. If a number is not on the list, calls cannot be made to this number. To activate or cancel this feature, you must enter the PIN2 code. If the PIN2 code is entered incorrectly three consecutive times, the PIN2 code will be locked down.
User Group User Group Used to create a closed group of callers based on a service provided by the network operator. The members of a User Group can call each other, but cannot conduct calls with anyone outside the group unless special provisions are made. Outside Access When the User Group service is activated, enabling Outside Access will allow users in the group to make calls to numbers outside the group. However, incoming calls will still be restricted to calls within the group.
Manual: If this option is selected, when outside the coverage of your regular network, the phone will list all the networks of telecom vendors and allow you to choose. Available List Allows you to manually select a network from the list. Band Setting Allows you to set an appropriate band in the GSM network system. Connection Allows you to set whether the phone will search for a GPRS network when it is turned on. GPRS & GSM: When it is turned on, the phone will search for available GPRS and GSM networks.
Security You can use various codes and locks to prevent unauthorized use of the phone. PIN Code The PIN (Personal Identification Number) is the password provided by your network operator. You need this password in order to use the SIM card. If you enter the PIN incorrectly three times in a row, the SIM card will be locked. You must now enter the PUK (Personal Unblocking Key) for that SIM card in order to unlock it. Please contact your network operator to obtain a PUK.
SIM Lock When activating the SIM Lock, you must enter the previously set SIM Lock password (the default SIM Lock password is 1234). The password must be between 4 and 8 digits. Once the SIM Lock is activated, you will be required to enter the SIM Lock code to use another SIM card on your phone. Power Saving Mode Activating this mode will turn off the keypad backlighting and the brightness of the display backlighting will be reduced to conserve battery power.
Care and Maintenance Take note of the points noted below to ensure that you are using the phone properly and to extend the lifespan of the phone. • Store the phone and its accessories out of the reach of children. • Keep the phone and accessories dry, and use the phone in environments where the temperature is between – 10°C and 45° C. High or low temperatures outside this range may damage the phone. • If possible, do not use or store the phone in excessively dusty or dirty environments.
Troubleshooting If you encounter problems while using the phone, or if it performs erratically, you can consult the information in the chart below. If your particular problem cannot be resolved using the information in the chart, contact the dealer where you purchased the phone. Problem Possible cause Solution • The network signal is too Move to a location where the weak at your current network signal can location — for example, in properly received.
Problem Possible cause • The standby time is related to your network operator's system configuration. The same phone used with different network operators' systems will not provide exactly the same length of standby time. Shortened standby time • The battery is depleted. In Use a new battery. high-temperature environments, battery life will be shortened. • If you are not able to connect to the network, the phone will continue to send out signals as it attempts to locate a base station.
Problem Possible cause • SIM card invalid. Unable to connect to the network. You cannot answer incoming calls. Solution Contact your network operator. • You are not within the Check the service area with network's service area. your network operator. • Poor signal. Move to an open space, or if you are inside a building, move closer to a window. • You have activated Go to Phone Book > Privacy Manager > Reject List in order to remove contacts from the list.
Problem Unable to enter information into the Phone Book. Unable to select certain features. Unable to be searched by other Bluetooth devices Possible cause • The Phone Book's memory is already full. Solution Delete unnecessary data from the Phone Book. • Your network operator Contact your network does not support these operator. features, or you have not applied for services that provide these features. • Your phone is set to be Go to Tools > Bluetooth > undiscoverable.
Appendix: Accessories For the accessories that are compatible with your phone, refer to the list below.
