User manual

Operation28
•Using the OSD menu
1. Press MENU/EXIT and then press ◄/► until
the
Display menu is highlighted.
2. Press ▼ to highlight 2D Keystone and press
MODE/ENTER. The 2D Keystone page
displays.
3. Press ▲, ▼, ◄, ► to adjust the keystone
values.
•Using the QUICK INSTALL key
1. Press QUICK INSTALL on the remote control.
2. Press ▼ to highlight 2D Keystone and press
MODE/ENTER. The 2D Keystone page
displays.
3. Press ▲, ▼, ◄, ► to adjust the keystone
values.