Operation Manual
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Adjusting the projected image
- Using the menus
- Securing the projector
- Switching input signal
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Remote paging operations
- Freezing the image
- Hiding the image
- Locking control keys
- Operating in a high altitude environment
- Adjusting the sound
- Using the test pattern
- Using the teaching templates
- Shutting down the projector
- Direct power off
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Operation 43
Function Description
Panel Key
Lock
Disables or enables all panel key functions except POWER on the
projector and keys on the remote control. See "Locking control keys"
on page 32 for details.
Background
Color
Sets the background color for the projector.
Splash
Screen
Allows you to select which logo screen will display during projector
start-up.
High
Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 32 for details.
Audio
Settings
See "Adjusting the sound" on page 33 for details.
Lamp
Settings
Lamp Mode
See "Setting the Lamp Mode" on page 47 for details.
Reset Lamp Timer
See "Resetting the lamp timer" on page 51 for details.
Lamp Timer
See "Getting to know the lamp hour" on page 47 for details on how the
total lamp hour is calculated.
Security
Settings
See "Utilizing the password function" on page 22 for details.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you
can connect the projector using a suitable RS-232 cable and update or
download the projector’s firmware. This function is intended for
qualified service personnel.
Test Pattern
See "Using the test pattern" on page 33 for details.
4. SYSTEM SETUP: Basic menu
5. SYSTEM SETUP: Advanced menu