Operation Manual

Operation
42
Hiding the image
Press the Eco Blank button from projector or remote control to turn off the image
for a period of time with up to 70% lamp power saving. Press any key on the projector
or remote control to restore the image.
The word "Eco Blank" appears at the screen
while the image is hidden. When this function is
activated with an audio input connected,the audio
can still be heard.
• Eco Blank: Save up 70% of your lamp power.
Time to do your part in saving the planet.
The automatic switch to Eco Blank Mode after
the projector is turned on for over three minutes
without a display source, eliminating unnecessary energy waste and prolonging the life
of the projector lamp
You can set the blank time in the SYSTEM SETUP: Basic > Operation Settings
> Blank Timer menu to let the projector return the image automatically after a
period of time when there is no action taken on the blank screen. The length of time
can be set from 5 to 30 minutes in 5-minute increments.
Do not block the projection lens from projecting as this could cause the
blocking object to become heated.
No matter Eco Blank Timer is activated or not, you can press any key
(except the Page Up/Down key) on the projector or remote control to
restore the picture.
Freezing the image
Press on the remote control to freeze the
image. The word 'FREEZE' will display in the
screen. To release the function, press any key
(except the Page Up/Down key) on the
projector or remote control.
Even if an image is frozen on the screen, the
pictures are running on the video or other device.
If the connected devices have active audio output,
you will still hear the audio even though the image
is frozen on screen.