User manual

Operation
77
FUNCTION DESCRIPTION
Quick
Cooling
Selecting On enables the function and the projector cooling time will
be shortened to a few seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 44 for details.
Audio
Settings
Allows you to enter the audio setting menu. See "Adjusting the
sound" on page 44 for details.
Mute
Sets the mute function.
Volume
Adjusts the audio volume level.
Microphone volume
Adjusts the microphone sound level.
Power on/off Ring Tone
Sets the power on/off ring tone.
Lamp
Settings
Lamp Mode
See "Setting Lamp Mode as Economic" on page 82 for details.
Reset lamp timer
See "Resetting the lamp timer" on page 86 for details.
Equivalent lamp hour
See "Getting to know the lamp hour" on page 82 for details on
how the total lamp hour is calculated.
Security
Settings
Change password
You will be asked to enter the current password before changing to a
new one.
Change Security Settings
Power on Lock
See "Securing the projector" on page 32 for details.
Splash Screen On Lock
You will be asked to enter password when changing the setting.
Web Control Lock
See "Using the Web Control Lock" on page 60 for details.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you
can connect the projector using a suitable RS-232 cable. This function
is intended for qualified service personnel.
5. SYSTEM SETUP: Advanced menu