Operation Manual

Introduction 17
15. ► Right/
Increases the projector volume.
When the On-Screen Display
(OSD) menu is activated, the #3,
#5, and #15 keys are used as
directional arrows to select the
desired menu items and to make
adjustments.
16. MODE/ENTER
Selects an available picture setup
mode. Activates the selected On-
Screen Display (OSD) menu item.
17. SOURCE
Displays the source selection bar.
18. PAG E +/PAGE -
Operate your display software
program (on a connected PC)
which responds to page up/down
commands (like Microsoft
PowerPoint).
19. MIC/VOL +/MIC/VOL -
The function is not available on this
projector.
20. MUTE
Toggles projector audio between
on and off.
21. SMART ECO
Switch the lamp mode between
Eco/Normal and SmartEco.
22. QUICK INSTALL ("TEST" is
for Japan region)
Displays the Quick Install OSD
menu.
Operating the LASER
pointer
The Laser Pointer is a
presentation aid for
professionals. It emits a
beam of red light when
you press it.
The laser beam is
visible. It is necessary to
press and hold LASER
for continuous output.
Do not look into the laser light
window or shine the laser light
beam on yourself or others. See
the warning messages on the
back of the remote control prior
to using it.
The laser pointer is not a toy. Parents
should be mindful of the dangers of
laser energy and keep this remote
control out of the reach of children.