Operation Manual

Introduction 9
Introduction
Projector features
The projector offers the following features
• SmartEco™ starts your dynamic power saving
The SmartEco™ technology offers a new way of operating the projector
lamp system and saves lamp power up to 30% depending on the content
brightness level.
• Interactive capability
Extend the interactive function with optional PointWrite module.
• Vertical 8% lens shift
Optimize the installation flexibility.
• Filter Free
Filter free design to lower maintenance and operating costs.
• Network Control
Integrated RJ45 connector for wired network control allowing
management of projector status from a computer using a web browser.
Enable Network Standby mode <6W.
• Crestron RoomView
®
, and AMX supported
The projector supports Crestron eControl and RoomView and AMX
allowing you to control and manage equipment from a remote computer
via LAN connection.
• One-key auto-adjustment
Pressing AUTO on the keypad or remote control to show the best
picture quality immediately.
• Built-in 10W x 2 speaker(s)
Built-in 10W x 2 speaker(s) providing stereo audio when an audio input is
connected.
• Quick Cooling, Auto Power Off, Direct Power On
Quick Cooling function speeds up the cooling process when turning off
the projector. Auto Power Off function allows the projector to turn off
automatically if no input signal is detected after a set period of time. and
Direct Power On boots up the projector automatically when the power
is connected.
• Instant Restart
Selectable Instant Restart function enables you to restart the projector
immediately within 90 seconds after turning it off.
• 3D Function supported
Various 3D formats make the 3D function more flexible. By presenting
the depth of the images, you can wear BenQ 3D glasses to enjoy the 3D
movies, videos and sporting events in a more realistic way.