Manualshelf

User Guide

ManualsBrandsBenQ ManualsComputers & AccessoriesBenQ PD3200Q 32" 2K Designer Monitor, 2560x1440 2K QHD, sRGB, CAD/CAM, Animation, Darkroom, KVM, DualView , 60Hz refresh rate
1234
2 Adjusting the screen refresh rate
Adjusting the screen refresh rate
You don’t have to choose the highest possible refresh rate on an LCD display, because it is not
technically possible for an LCD display to flicker. The best results are obtained by using the
factory modes already set in your computer. Check next chapter to see the factory modes:
Preset display modes on page 3.
1. Double click the Display icon in Control Panel.
2. From the Display Properties window, select the Settings tab and click the Advanced
button.
3. Select the Adapter tab, and select an appropriate refresh rate to match one of the
applicable factory modes as listed in the specification table.
4. Click Change, OK, then Yes.
5. Close the Display Properties window.
Depending on the operating system on your PC, different procedures should be followed to adjust the screen
resolution. Refer to the help document of your operating system for details.