User Manual

13 How to assemble your monitor hardware

Tighten the thumbscrew on the bottom of the monitor

base as illustrated. And then turn the stand

counterclockwise to face forward.

Orient and align the stand arm with the monitor ( ),

push them together until they click and lock into place

().

Gently attempt to pull them back apart to check that

they have properly engaged.

Carefully lift the monitor, turn it over and place it

upright on its stand on a flat even surface.

You should position the monitor and angle the screen to

minimize unwanted reflections from other light sources.

2. Connect the PC video cable

To Connect the DVI-D Cable

Connect the plug of the DVI-D cable (at the end

without the ferrite filter) to the monitor video socket.

Connect the other end of the cable (at the end with the

ferrite filter) to the computer video socket.

Tighten all finger screws to prevent the plugs from

accidently falling out during use.