User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Power safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- Basic menu operation
- Customizing the hot keys
- Adjusting display mode
- Choosing an appropriate picture mode
- Working with two video sources (KVM Switch)
- Working with DualView
- Connecting multiple monitors via MST (Multi-Stream Transport)
- Working with HDR technology
- Adjusting screen brightness automatically (Bright Intelligence)
- Navigating the main menu
- Troubleshooting
43 Navigating the main menu
Display
Mode
This feature is provided to allow aspect ratios other than 16:9
to be displayed without geometric distortion.
The options under Display Mode will be different depending on the
input signal sources.
Depending on your selection of
Picture Mode, different Display Mode
option is pre-set. Change the setting if needed.
Full Scales the input image to fill the screen. Ideal for
16:9 aspect images.
Aspect The input image is displayed without geometric
distortion filling as much of the display as
possible.
1 : 1 Displays the input image in its native resolution
without scaling.
Overscan Slightly enlarges the input image. Use this feature to hide
annoying edge noise if present around your image.
Available only when the input source is HDMI.
• ON
• OFF
RGB Range Determines the range of color scales. Select an option that
matches the RGB range setting on the connected device.
• Auto
Detect
• RGB (0 ~
255)
• RGB (16 ~
235)
Item Function Range