Operation Manual

Introduction 11
Controls and functions
Projector
1. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
See "Using
the menus" on page 31 for details.
2. Keystone/Arrow keys ( /▲ Up)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting Keystone" on page 30 for
details.
3. INPUT
Displays the source selection bar. See
"Switching input signal" on page 35 for
details.
4. ◄ Left/ Decrease volume level
Decreases volume. See "Adjusting the
sound level" on page 45 for details.
5. Keystone/Arrow keys ( /▼ Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting Keystone" on page 30 for
details.
6. BLANK
U
sed to hide the screen picture. See "Hiding
the image" on page 43 for details.
7. MODE/ENTER
Selects an available picture setup mode.
See "Selecting a picture mode" on page
38 for details.
Enacts the selected On-Screen Display
(OSD) menu item. See "Using the menus"
on page 31 for details.
8. ► Right/ Increase volume level
Increases volume. See "Adjusting the
sound level" on page 45 for details.
When the On-Screen Display (OSD)
menu is activated, the #2, #4, #5, and #8
keys are used as directional arrows to
select the desired menu items and to
make adjustments. See "Using the menus"
on page 31 for details.
9. AUTO
Automatically determines the best
picture timings for the displayed image.
See "Auto-adjusting the image" on page
29 for details.
10. LENS SHIFT UP/DOWN
Rotate to move lens up or down.
11. LENS RELEASE button
Flip to release lens.
12. LENS SHIFT RIGHT/LEFT
Rotate to move lens right or left.
1
2
4
11 12
5
6
10
97 8
3