Operation Manual

English
44
• Load Memory: To recall saved lens settings: Press Enter key to display lens memory list, press
▲▼
arrow key to select desired memory, press Enter key again to retrieve and load the saved
lens settings. The projector can keep 10 groups of lens settings. The memory position with lens
settings will be marked in a different color and you can select only those with actual settings. To
add or change lens memory, please select below Edit Memory option.
• Edit Memory: Edit memory name and save current memory settings including lens shift, zoom
and focus. Press Enter key to display the virtual keyboard. Press
▲▼◄►
and Enter keys to
select or accept setup values.
• Change lens memory name: Your lens memory has a default name in the format of
"Memory_NN" where NN is any number from 00 to 99. You may press Backspace key to erase
characters shown in dialog box, press Caps key to toggle switch between upper and lower case,
▲▼◄►
key to select letters, and Enter key to accept changes made. Each memory name can
contain up to 9 characters including letters, numbers, symbols and blank spaces.
• Cancel: Press to cancel changes made to lens settings.
• Accept: Press to accept changes made to lens settings.
• Clear Memory: Press to clear settings saved in current memory position. The memory button
prompts you to confirm the deletion. Press Enter to delete the settings or
▲▼◄►
key to
move the cursor away from the position and cancel the deletion.
Caution:
Please execute the Center Lens function every time a lens is installed to ensure that the projector memorizes the
exact lens settings.