Owner's Manual

64
English
Cleaning the Filters
The projector uses three lters to keep the fans free of dust and other particles, and should be
cleaned every 500 hours of operation. In dusty environments, it is recommended to clean the lters
more frequently. If the lter is dirty or clogged, your projector may overheat. When the message
be-low is displayed, the lters must be cleaned.
When the Please clean lter message is displayed, please clean all three lters at the same time to synchronize the
Filter time display. The Filter Message item should be enabled in the Options menu.
Refer to the following guide to clean the lters.
1. The left-side and rear lters can be cleaned as demonstrated in the following images.
Only clean the outside of the exhaust vents with a vacuum cleaner.
2. The bottom exhaust vent can be accessed as shown.
3.Gently slide the ter holders in the direction shown.