User manual

Operation 39
Note that the menu items are available when the projector detects at least one valid signal.
If there is no equipment connected to the projector or no signal detected, limited menu
items are accessible.
Main menu Sub-menu Options
5.
SYSTEM
SETUP:
Advanced
High Altitude Mode On/Off
Audio Settings
Mute On/Off
Volume
Power On/Off
Ring Tone
On/Off
Lamp Settings
Lamp Mode Normal/Economic/SmartEco
Reset Lamp Timer
Equivalent Lamp
Security
Settings
Change Password
Change Security
Settings
Power On Lock
Web Control Lock
Baud Rate
2400/4800/9600/14400/19200/
38400/57600/115200
Test Pattern On/Off
Closed Caption
Closed Caption
Enable
On/Off
Caption Version CC1/CC2/CC3/CC4
Standby
Settings
Network On/Off
Monitor Out On/Off
Audio Pass
Through
Off/Audio In/Audio L/R/Network
Display/HDMI/USB Display
Network
Settings
Wireless LAN
Status
SSID
SSID Display
IP Address
Connection Mode
Apply
Projection Log In
Code
On/Off
Reset All Settings
6.
INFORMA
TION
Current System Status
• Source
• Picture Mode
• Lamp Mode
• Resolution
• 3D Format
• Color System
• Equivalent Lamp
• Firmware Version