User manual

13
2. Make sure the gold pin connection is on the correct side of the
battery compartment.
3. Insert the cover hook into the recess and gently push the cover until
it fully locks into place.
1.4.3 Charging Battery
You can use the adaptor attached to charge the lithium-ion battery. Just
insert the battery into the Digital Projector Camcorder and connect the
adaptor to the camcorder and a power outlet. (You can also connect to a
computer via a USB cable.)
Battery charging status:
z Red light – Battery is charging.
z Light off – Battery charging is done. (A full charge takes about 2 hours
and 30 minutes).
Downloaded From projector-manual.com BenQ Manuals