User's Manual
Table Of Contents
- BenQ.com
- Disclaimer
- FCC regulations
- Package contents
- Front-right view
- Left side view
- Rear view
- Installing the battery
- Turning the device on/off
- Using the touchscreen
- Using Touch zone
- Basic setup
- Setting time
- Setting BenQUtility
- 1. To launch it you can go to Programs > BenQUtility.
- 2. Tap On in WLAN/Bluetooth.
- Using WLAN
- 1. Tap and drag the scroll box of WLAN to On in BenQUtility.
- 2. Setup the WLAN access point according to the information provided by your ISP. You may be requested to enter a password. Contact the service provider for information required to make the connection.
- 3. Confirm with OK to exit BenQUtility. When the WLAN connection is made successfully, the WLAN indicator on the right lights up in blue. And you are ready to activate programs that require network connectivity.
- Using the microSD card
BenQ.com
© 2009 BenQ Corporation.
All rights reserved. Rights of modification reserved.
Disclaimer
BenQ Corporation makes no representations or warranties,
either expressed or implied, with respect to the contents hereof
and specifically disclaims any warranties, merchantability or
fitness for any particular purpose. Further, BenQ Corporation
reserves the right to revise this publication and to make changes
from time to time in the contents hereof without obligation of
this company to notify any person of such revision or changes.
This quick start guide contains brief introduction to the
appearance and basic operations of your device. For details,
safety precautions, and more information, please refer to the
user manual.