User`s guide
2*+,-3
2*+,-3 2*+,-3
2*+,-3
3. Configuration (SS0224 only)
This section explains the configuration of smart switch, SS0224. For each 10/
100Base- T/TX port, basic setting include port speed, duplex mode, flow
control, auto-negotiation, etc. Other enhanced features configuration
include port-based VLAN, port-based trunking, QoS, and port mirroring.
3.1. Setting up Console Port Connection
To configure your switch through the console port, it is necessary to first set
up a terminal emulation program, and the HyperTerminal for Windows
95,98,and NT is suggested. Before setting the Hyper Terminal, make sure
that the switch, RS-232 cable and the PC are in proper installation. Then
connect PC to the console port in the back of SS0224 using a RS-232 straight
cable.
To configure the Hyper Terminal utility, please go with the following steps:
• Running the Hyper Terminal utility program.
• Select COM port to communicate with SS0224.
• Set the serial port properties then Press OK.
%42%
%42% %42%
%42%
#5*,!
#5*,!#5*,!
#5*,! 6#
6#6#
6#
4,!
4,!4,!
4,! + 7-
+ 7-+ 7-
+ 7-
55*
55* 55*
55*
1**%8%!8!*,
1**%8%!8!*,1**%8%!8!*,
1**%8%!8!*,
**3/!%+*
**3/!%+***3/!%+*
**3/!%+*
2*-
2*-2*-
2*-
"
" "
"
9*"* 5!%%
9*"* 5!%%9*"* 5!%%
9*"* 5!%%