User`s guide

 2*+,-
 2*+,- 2*+,-
 2*+,-
Turn on the power of SS0224 after Hyper Terminal utility is set. If the
communication is successful, user should see the main menu of console
program on the screen as below:
Parameters in this screen are described in the following table.
Field Description
Port Displays the number of the currently selected port.
LINK Displays the current link status between the selected port and the
connected node. This can be Up or Down.
En Displays the selected port’s enable[ON] or disable[OFF] status
An Displays auto negotiation function status of the selected port. This
can be enable[ON] or disable[OFF].
Rate Displays user set port speed. This can be 10 or 100Mbps.
Duplex
Displays duplex mode of the selected port. This can be [FULL] or
[HALF]
Flow Displays flow control capability of the selected port. This can be
[ON] or [OFF]
Mirror Displays Port mirroring status, mirroring [ON] or [OFF], or set as
capture port[CAP]