User`s guide
2*+,-
2*+,- 2*+,-
2*+,-
3.3. Basic port-based configuration
The basic configurations provided here only apply to 24 RJ-45 ports. They
includes the following feature:
!
! !
!
In this feature, user can disable/enable selected port. And the default setting
is port enabled. To enter this feature, press [E] from the main menu. For
example: Select port 1 and press 'D' to disable port 1's transmit and
receiving. On the contrary, user can enable it following the same policy.
Refer to below figure.
"#$ "!
"#$ "!"#$ "!
"#$ "!
In this feature, user can enable or disable the auto-negotiation function of
each RJ-45 port. The default setting is auto-negotiation enable. To enter this
feature, press [A] from the main menu. For example, to disable port 2's