User`s guide
2*+,-/
2*+,-/ 2*+,-/
2*+,-/
auto-negotiation function, refer to the following steps: select port 2 and
press [D] to disable. See the figure below.
%!
%! %!
%!
This feature is only used when the port's auto-negotiation function is
disabled. User can force to change specific port's data rate to 10Mbps or
100Mbps.Press [R] from the main menu to enter this setting. For example:
force port 3's data rate to 10Mb, refer to the figure below. User should note
that to force specific port's rate, auto-negotiation feature will be disabled at
the same time.