User`s guide

 2*+,-
 2*+,- 2*+,-
 2*+,-
After choosing to mirror both ingress and egress traffic of port 2,
I/E
: Ingress/Egress mirror rule Configure, use this function to select mirror
rules of all system. After press [I] or [E] to enter ingress/egress mirror
rule configure, user can see the following items:
• Press “
P
” to monitor all frames of all ports that are set as Ingress/Egress
ports.(default will mirror all frames of selected ports)
• Select “
D
” to mirror all Ingress/Egress frames that has specific Destination
MAC Address(Setup in 'M' enter MAC Address) of all ports that be chosen
set as Ingress/Egress ports.
• Select “
S
” to mirror all Ingress/Egress frames that has specific Source MAC
Address(Setup in 'M' enter MAC Address) of all ports that be chosen as
Ingress/Egress ports.
• Press “
M
” to setup the MAC Address.
• Press “
V
” to set Ingress/Egress mirror divider. The value indicates receive/
transmit frames that have passed the device and divided by the value only
one in n frames.
For example, to set ingress mirror rules as " For those mirror ingress ports'
traffic, only mirror those whose SA is 01-02-03-04-05-06. And the mirroring
frequency is to mirror 1 packet for every 100 packets", user should can
follow the below steps: 1. Press [I] to enter ingress rule configure. 2. Press