User`s guide




1.2. Features & Specifications



• Compliant with IEEE 802.3 10Base-T Ethernet and 802.3u 100Base-TX Fast
Ethernet Standards.
• Provides 24 ports for 10Base-T/100Base-Tx, standard RJ-45 connectors.
• All RJ-45 ports supports 10Base-T/100Base-Tx and Full-Duplex/Half-
Duplex Auto-negotiation function.
• Supports MDI/MDI-X auto crossover.
• Optional up to 2 ports fiber module for 100BASE-FX multi-mode module
with ST, SC, MT-RJ, or VF-45 connector, or 100BASE-FX single-mode
module with SC connector.
• Supports store-and-forward switching mechanism.
• Supports port-based VLAN (SS0224 only).
• Supports port-based trunking (SS0224 only).
• Supports 802.1p based QoS (SS0224 only).
• Supports port-mirroring (SS0224 only).
• Supports Plug-and-Play.
• Supports up to 4K MAC addresses table / hashing algorithm on address
learning.
• Supports Aging function and 802.3x flow control for full Duplex and
collision-based backpressure function for half duplex operation.
• 768k Bytes buffer memory.
• Automatic address learning, address aging and address migration.
• Simple and economical way to bridge 10Base-T network and 100Base-Tx
network.
• Easily connect and segment Fast Ethernet hubs or segments.
• Front panel diagnostic LEDs.
• Rack-mount design that can be mounted on the industrial standard 19
inches rack in the enterprise wiring center.