User manual

19
Connecting to video equipment
English
Connecting multiple sources through HDBaseT
HDBaseT is a connectivity standard that combines HD digital video, audio, Ethernet, power over cable, and
various control signals. These signals are transmitted with one CAT5e (or above) cable up to 100 meters in
length. With the use of HDBaseT switching matrix (commercially available), you may connect multiple
sources to your projector with HDBaseT connection.
The illustration below is for reference only, actual layout may vary.
• When using the IR Extender on the HDBaseT Matrix in rooms with limited space, such as small
meeting rooms, turn off the projector’s IR sensors to prevent interference.
• When connecting the RJ45 cable, avoid coiling and intertwining the cable as it may cause signal
noise or interruption.
VGA IN YPbPr
IR TX
IR RX
RJ45
Lan
HDMI RS232 RJ45
HD Connect
Control PC
Projector
Remote
Control
Notebook PC
Blu-ray Player
IR Blaster
IR Extender
Blu-ray Player
Remote Control
HDBaseT Matrix
Projector