User manual

Using the projector

English

Source menu

Function Description

Quick Search

Sets whether the projector searches automatically for input sources. If the

source scan is On, the projector will scan for input sources until it acquires a

signal. If the function is not activated, the projector selects the last used input

source.

HDMI Format

Selects an input source type for the HDMI signal. Auto is the default and

recommended setting. You can also manually select the source type. The

different source types carry different standards for the brightness level.

This function is only available when the HDMI signal is selected.

Audio Settings

See "Adjusting the sound" on page 36 for details.

Position

Displays the position adjustment page. To move the projected picture, use the

directional arrow keys. The values shown on the lower position of the page

change with every key press you made until they reach their maximum or

minimum. They will return to their factory preset values whenever the

projector is re-started.

This function is only available when the Component 1, Component 2,

or PC signal is selected.

Phase

Adjusts the clock phase to reduce picture distortion.

This function is only available when the

Component 1, Component 2, or PC signal is selected.

H. Size

Adjusts the horizontal width of the picture.

This function is only available when the Component 1, Component 2,

or PC signal is selected.