User manual

53
Using the projector
English
System Setup: Advanced menu
Function Description
High Altitude
A mode for operation in areas like high altitude or high temperature. See
"Operating in a high altitude environment" on page 42 for details.
Lamp Settings
Lamp Mode
Selects the projector lamp power among Normal-Dual, Economic-Dual,
Normal-Single Alternative, and Economic-Single Alternative modes. See
"Setting the lamp mode" on page 37 for details.
Reset Lamp 1 Timer/Reset Lamp 2 Timer
Once the lamp is renewed, select Reset to return the lamp timer to "0". See
"Resetting the lamp timer" on page 61 for details.
Lamp Information
Shows the lamp hour information. See "Getting to know the lamp hour" on
page 57 for details.
Security Settings
Password / Power On Lock
Limits use of the projector to only those who know the correct password. See
"Utilizing the password function" on page 23 for details.
Change Password
You will be asked to enter the current password before changing to a new one.
See "Changing the password" on page 25 for details.
Serial Port Setting
Baud Rate
Selects a baud rate that is identical with your computer’s so that you can
connect the projector using a suitable RS-232 cable and update or download
the projector’s firmware. This function is intended for qualified service
personnel.
HDBaseT
Allows users to connect and control various input sources with a CAT5e/CAT
6 cable for up to 100 meters in length. HDBaseT transmits uncompressed
ultra-high-definition video (up to 4K), audio, power over HDBaseT, Ethernet,
and a series of controls such as RS and IR.
This function is only available when the projector is connected to a
HDBaseT switching matrix, and the baud rate is fixed at 9600.
Wired LAN
Allows users to manage the projector from a computer using a web browser
when the computer and the projector are properly connected to the same
local area network.
Does not include HDBaseT control functions.