User manual

54
Using the projector
English
Closed Caption
Closed Caption Enable
Activates the function by selecting On when the selected input signal carries
closed captions.
• Captions: An on-screen display of the dialogue, narration, and sound effects
of TV programs and videos that are closed captioned (usually marked as
"CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select CC1,
CC2, CC3, or CC4 (CC1 displays captions in the primary language in your
area).
These functions are only available when the Video signal is selected.
Standby Settings
Network
Selecting On enables the function. The projector is able to provide the
network function when it is in standby mode.
When serial port setting is set to HDBaseT or RS232, this function
appears gray and is not available.
HDBaseT
Selecting On enables the function. The projector’s remote control can be used
to control input sources connected to the projector via HDBaseT when it is in
standby mode.
When serial port setting is set to RS232 or Wired LAN, this function
appears gray and is not available.
Monitor Out
Selecting On enables the function. The projector can output a VGA signal
when it is in standby mode and the PC jack is correctly connected to devices.
See "Connecting a monitor" on page 18 for how to make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices.
Enabling this function slightly increases the standby power
consumption.
Network Settings
Wired LAN
See "Controlling the projector through a Wired LAN environment" on page 37
for details.
Expert Mode
The Expert Mode menu is password protected and only accessible by
authorized calibrators. The ISF (Imaging Science Foundation) has developed
carefully crafted, industry-recognized standards for optimal video performance
and has implemented a training program for technicians and installers to use
these standards to obtain optimal picture quality from BenQ video display
devices. Accordingly, we recommend that setup and calibration be performed
by an ISF certified installation technician.
For more information, please go to www.imagingscience.com or
contact the place you purchased the projector.
Reset All Settings
Returns all settings to the factory preset values.
The following settings will still remain: names of user modes, 2D
Keystone, Language, Projector Installation, High Altitude, Password,
and Expert Mode.