Owner's Manual
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Adjusting the projected image
- Using the menus
- Securing the projector
- Switching input signal
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Remote paging operations
- Freezing the image
- Hiding the image
- Locking control keys
- Operating in a high altitude environment
- Adjusting the sound
- Using the test pattern
- Using the teaching templates
- Shutting down the projector
- Direct power off
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
- Warranty and Copyright information
Operation44
Note that the menu items are available when the projector detects at least one valid signal.
If there is no equipment connected to the projector or no signal detected, limited menu
items are accessible.
Main menu Sub-menu Options
5.
SYSTEM
SETUP:
Advanced
Network
Settings
Wired LAN
Status
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
Wireless LAN
Status
SSID
SSID Display
IP Address
Connection Mode
Apply
Remote Desktop
Account
Password
Connect
Projection Log In
Code
On/Off
Broadcasting
Broadcasting
Channel
IP Address
AMX Device
Discovery
On/Off
MAC Address
Reset All Settings
6.
INFORMA
TION
Current System Status
• Source
• Picture Mode
• Resolution
• Lamp Mode
• 3D Format
• Color System
• Equivalent Lamp
• Firmware Version