Operation Manual

59
Using the projector
English
Information menu
This menu shows you the current operating status of the projector.
Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments
are not shown on the screen.
Function Description
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the Picture > Picture Mode menu.
Lamp Mode
Shows the selected lamp mode in the System Setup: Advanced > Lamp
Mode
menu.
Resolution
Shows the native resolution of the input signal.
3D Format
Shows the current 3D mode. Only available when 3D mode is enabled
Color System
Shows input system format.
Lamp Usage Time
Shows the total lamp time used.
Firmware Version
Shows the current firmware version