Operation Manual

Operation

Optimizing the image

Selecting a picture mode

The projector is preset with several predefined

picture modes so that you can choose one to

suit your operating environment and input

signal picture type.

To select an operation mode that suits your

need, you can follow one of the following steps.

• Press MODE on the projector or remote

control repeatedly until your desired mode

is selected.

•Go to the Picture Mode menu (which is in the Basic menu when the projector

is with input signal or in the Advanced menu > Picture menu) and press /

to select a desired mode.

The picture modes are listed below.

1. Bright mode: Maximizes the brightness of the projected image. This mode is

suitable for environments where extra-high brightness is required, such as using

the projector in well lit rooms.

2. Vivid mode (Default): Is designed for presentations. The brightness is

emphasized in this mode.

3. Cinema mode: Is appropriate for playing colorful movies, video clips from

digital cameras or DVs through the PC input for best viewing in a blackened

(little light) environment.

4. Game mode: Is appropriate for playing games.

5. User 1/User 2 mode: Recalls the settings customized based on the current

available picture modes. See "Setting the User 1/User 2 mode" on page 36 for

details.

Setting the User 1/User 2 mode

There are two user-definable modes if the current available picture modes are not

suitable for your need. You can use one of the picture modes (except the User 1/

User 2) as a starting point and customize the settings.

1. Open the OSD menu and go to the Picture Mode function.

2. Press / to select User 1 or User 2.

3. Press to select User Mode Management.

This function is only available when User 1 or User 2 mode is selected up in the

Picture Mode sub-menu item.

4. Press / to select a picture mode that is closest to your need.

5. Press to select a sub-menu item to be changed and adjust the value with /

. See "Fine-tuning the image quality" below for details.

6. The settings will be saved when selecting.