VZ Series LCD Monitor User Manual Downloaded from ManualMonitor.
Copyright Copyright © 2014 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
BenQ ecoFACTS BenQ has been dedicated to the design and development of greener product as part of its aspiration to realize the ideal of the “Bringing Enjoyment ‘N Quality to Life” corporate vision with the ultimate goal to achieve a low-carbon society.
Table of Contents Copyright................................................................................................................. 2 Disclaimer............................................................................................................... 2 Servicing................................................................................................................... 2 Safety................................................................................................................
Box contents When unpacking please check you have the following items. If any are missing or damaged, please contact the place of purchase for a replacement. LCD Monitor CD-ROM Power Cable Monitor Base D-Sub Cable DVI Cable HDMI Cable • *: Optional accessory. • Available accessories and the pictures shown here may differ from the actual contents and the product supplied for your region. For cables that are not supplied with your product, you can purchase them separately.
Installation • If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to the monitor until instructed to do so. • The following illustrations are for your reference only. Available input and output jacks may vary depending on the purchased model. • Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty.
Cleaning Please disconnect the power cord before cleaning the product. Clean the cabinet regularly with a cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
Connecting the monitor VZ2250/VZ2350 1 3 VZ2350HM 4 1 No. 1 2 3 4 5 2 3 4 5 Description AC power input jack HDMI socket DVI-D socket D-Sub socket Audio Line In 1. To protect equipment, always turn off the PC and LCD monitor before connecting. 2. Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket. 3.
Removing the monitor stand 1. Turn off the monitor and the power before unplugging the power cable. Turn off the computer before unplugging the monitor signal cable. 2. Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like a towel on the desk for padding, before laying the screen face down on a flat clean padded surface. 3. Remove the monitor stand. Please be careful to prevent damage to the monitor.
The control panel 1 2 5 4 3 No. VZ2250 / VZ2350 Description No. 1 2 3 4 5 Source / Auto / Exit ECO / 4:3 or wide / + Menu / Enter Power 1 2 3 4 5 VZ2350HM Description Source / Auto / Exit ECO / Volume / + Menu / Enter Power Source / Auto / Exit • Press and hold the AUTO key for 3 serconds to adjusts vertical position, phase, horizontal position and pixel clock automatically. • Press the AUTO key to switch to a desired input source, and confirm with the MENU key.
Basic OSD menu operation • Press the MENU button to activate the OSD menu. • Press - or + to navigate through the menu options. Once the desired option is highlighted, press the MENU key to confirm the selection. Press - or + to change the settings of the selected function. Press MENU key to save the new setting and exit the current function. Press - or + to select another function in sub-menu. Press AUTO to exit. If you want to adjust any other function, repeat the previous steps.
Menu introduction Available menu options may vary depending on the input sources, functions and settings. Menu options that are not available will become grayed out. And keys that are not available will be disabled and the corresponding OSD icons will disappear. Main menu Luminance Contrast Brightness Eco mode Function Range Adjusts the degree of difference between 0-100 darkness and lightness. Adjusts the balance between light and dark shades.
Main menu Color Warm Temp. Normal Cool User sRGB OSD Setup H. Position V. Position Timeout Language Function Applies a warm tint to the image and is factory pre-set to the news print standard white color. Allows video and still photographs to be viewed with natural coloring. Applies a cool tint to the image and is factory pre-set to the PC industry standard white color. The blend of the Red, Green and Blue primary colors can be altered to change the color tint of the image.
Getting the most from your BenQ monitor To gain the most benefit from your new BenQ LCD monitor, you should install the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor CD-ROM. The circumstances under which you connect and install your BenQ LCD Monitor will determine which process you need to follow to successfully install the BenQ LCD Monitor driver software.
How to install the monitor on a new computer This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver software on a new computer which has never had a monitor driver installed before. This instruction is only suitable for a computer which has never been used before, and for which the BenQ LCD Monitor is the first ever monitor to be connected to it.
How to upgrade the monitor on an existing computer This instruction details the procedure for manually updating the existing monitor driver software on your Microsoft Windows computer. It is currently tested as compatible for Windows 8.1, Windows 8, and Windows 7 Operating System (OS).
How to install on Windows 8 (8.1) system 1. Open Display Properties. Move the cursor to the lower-right of the screen or press the Windows + C buttons on the keyboard to bring up the Charm bar. Go to Settings, Control Panel, Devices and Printers and right-click the name of your monitor from the menu. Alternatively, right-click the desktop and select Personalize, Display, Devices and Printers, and right-click the name of your monitor from the menu. 2. Select Properties from the menu. 3.
How to install on Windows 7 system 1. Open Display Properties. Go to Start, Control Panel, Hardware and Sound, Devices and Printers and right-click the name of your monitor from the menu. Alternatively, right-click the desktop and select Personalize, Display, Devices and Printers, and right-click the name of your monitor from the menu. 2. Select Properties from the menu. 3. Click the Hardware tab. 4. Click Generic PnP Monitor, and then the Properties button. 5.
Troubleshooting The power LED indicator is not on. • Make the power cord is properly connected to a grounded power outlet and the monitor. • Make sure you have pressed the key. The image is blurred. • Read the instructions in "Preset display modes" on 24, and then select the correct resolution, refresh rate and make adjustments based on these instructions. • Remove the extension cable for the test. It is normal for blurring to occur due to conduction losses in extension cables.
Is the prompt on the display not illuminated at all? Check the power supply mains socket, the external power supply and the mains switch. The image is distorted, flashes or flickers. Read the instructions in "Preset display modes" on 24, and then select the correct resolution, refresh rate and make adjustments based on these instructions. You are running the monitor at its native resolution, but the image is still distorted.
Specification VZ2250 Panel Resolution Model name Driving system Viewable Image Size Pixel pitch Video Separate Sync. Display Color Dot Clock Horizontal scan range Horizontal scan Size(Maximum) Vertical scan range Vertical scan Size (Maximum) Optimal preset resolution Plug & Play Input Connector VZ2250 TFT Color LCD 54.62cm diagonal 0.08265*RGB (H) mm x 0.24795 (V) mm R, G, B Analog lnterface H/V TTL 16.7M Colors 165MHz 30 ~ 83kHz 476.064mm 50 ~ 76Hz 267.
VZ2350 Panel Resolution Model name Driving system Viewable Image Size Pixel pitch Video Separate Sync. Display Color Dot Clock Horizontal scan range Horizontal scan Size (Maximum) Vertical scan range Vertical scan Size (Maximum) Optimal preset resolution Plug & Play Input Connector VZ2350 TFT Color LCD 58.42cm diagonal 0.0884*RGB (H) mm x 0.2652 (V) mm R, G, B Analog lnterface H/V TTL 16.7M Colors 165MHz 30 ~ 83kHz 509.184mm 50 ~ 76Hz 286.416mm 1920x1080@60Hz VESA DDC2B VGA/DVI Analog: 0.
VZ2350HM Panel Resolution Model name Driving system Viewable Image Size Pixel pitch Video Separate Sync. Display Color Dot Clock Horizontal scan range Horizontal scan Size (Maximum) Vertical scan range Vertical scan Size (Maximum) Optimal preset resolution Plug & Play Input Connector VZ2350HM TFT Color LCD 58.42cm diagonal 0.0884*RGB (H) mm x 0.2652 (V) mm R, G, B Analog lnterface H/V TTL 16.7M Colors 165MHz 30 ~ 83kHz 509.184mm 50 ~ 76Hz 286.
Preset display modes Mode Resolution H.Frequency 640×480@60Hz VGA 640×480@72Hz 640×480@75Hz 800×600@56Hz 800×600@60Hz SVGA 800×600@72Hz 800×600@75Hz 1024×768@60Hz XGA 1024×768@70Hz 1024×768@75Hz 1280×1024@60Hz SXGA 1280×1024@75Hz 1440×900@60Hz WXGA+ 1440×900@60Hz 1680×1050@60Hz WSXGA 1680×1050@60Hz HD 1920×1080@60Hz **** 1280×960@60Hz 640×350@70Hz IBM-MODE DOS 720×400@70Hz MAC MODE VGA 640×480@67Hz MAC MODE SVGA 832×624@75Hz MAC MODE XGA 1024×768@75Hz 31.469 37.861 37.500 35.156 37.879 48.077 46.875 48.
