User manual

15
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver
software on a new computer which has never had a monitor driver installed before. This instruction
is only suitable for a computer which has never been used before, and for which the BenQ LCD
Monitor is the rst ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor
connected to it (and has monitor driver software installed), you should not be following these instructions. You
should instead be following the instructions for "How to upgrade the monitor on an existing computer" on
16.
1. Follow the instructions in "Installation" on 6.
When Windows starts, it will automatically detect the new monitor and launch the Found New
Hardware Wizard. Follow the prompts until it displays the option to Install Hardware
Device Drivers.
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check Search for a suitable driver for my device option, and click Next.
4. Check the option for CD-ROM drives (uncheck all others) and click Next.
5. Look to conrm that the wizard has selected the correct name of your monitor and click Next.
6. Click Finish.
7. Restart the computer.
To nd the suitable driver les for the purchased model, refer to the following table.
Driver les Suitable models
VZ2250 VZ2250
VZ2350 VZ2350 / VZ2350HM
Downloaded from ManualMonitor.com Manuals