Quick Start Guide

ManualsBrandsBenQ ManualsComputers & AccessoriesBenQ Wireless Dongle

BenQ

WDR02U

QuickStartGuide

BenQWirelessDongle 無線網卡

ProductOverview

WDR02UWirelessUSBAdapterconnectsyourdesktopcomputerto

aWi‐Finetworkforlag‐freevideostreaming,onlinegaming,secure

internetsurfing.

WDR02U 无线 USB 适配器连接你的台式电脑无延迟的视频流、在线游戏、

安全上网

WDR02U 無線 USB 適配器連接你的台式電腦無延遲的視頻流、在線遊戲、

安全上網



• Compatiblewith802.11a/b/g/n/acproducts

• 兼容 802.11a/b/g/n/ac 产品

• 兼容 802.11a/b/g/n/ac 產品



• Maximumspeedof867Mbpsat5GHzor400Mbpsat2.4GHz

network

•5GHZ的最大速率是 867Mbps,  2.4GHZ 最大速率是 400Mbps

Summary of content (6 pages)

PAGE 1
BenQ WDR02U Quick Start Guide BenQ Wireless Dongle 無線網卡 Product Overview WDR02U Wireless USB Adapter connects your desktop computer to a Wi‐Fi network for lag‐free video streaming, online gaming, secure internet surfing . WDR02U 无线 USB 适配器连接你的台式电脑无延迟的视频流、在线游戏、安全上网 WDR02U 無線 USB 適配器連接你的台式電腦無延遲的視頻流、在線遊戲、安全上網 • Compatible with 802.11a/b/g/n/ac products • 兼容 802.11 a / b / g / n / ac 产品 • 兼容 802.11 a / b / g / n / ac 產品 • Maximum speed of 867Mbps at 5GHz or 400Mbps at 2.
PAGE 2
• Supports 64/128 bit WEP, WPA/WPA2, WPA‐PSK/WPA2‐PSK • 支持 64/128 位 WEP、WPA / WPA2 WPA‐PSK / WPA2‐PSK • 支持 64/128 位 WEP、WPA / WPA2 WPA‐PSK / WPA2‐PSK • With super speed USB 3.0 port, the adapter experiences blazing speed data transfers up to 10x faster than USB 2.0. • 配备超高速 USB 3.0 端口，适配器经验的数据传输速度比 USB 2.0 快 10 倍。 • 配備超高速 USB 3.0 端口，適配器經驗的數據傳輸速度比 USB 2.
PAGE 3
2.4 设定完成。繁體中文 1、本產品內置驅動，即插即用 2.1 將 CT‐USB3 無線網卡插入設備中 2.2 選擇無線網路，接著點選[連線]按鈕 2.3 輸入網路密碼 2.4 設定完成 English 1、 This product built‐in driver, plug and play 2.1 WDR02U wireless card inserted into the device 2.2 Select a wireless network and click Connect. 2.3 Enter the network password. 2.4 Setup complete.
PAGE 4
‐‐‐ 低功率射低射頻電機之之使用不不得影響飛航安全全及干擾擾合法通信：經發發現有干擾擾現象時時，應立即即停用，並改善至至無干擾擾時方得得繼續使用。項合法通信信，指依電信法規規定作業業之無線電電通信低低功率射射頻電前項機需需忍受合法法通信或或工業、科學及醫科醫療用電波波輻射性性電機設設備之干擾擾。 FCC C STATEEMENTT Federall Communica ation Commis ssion Interferrence Stateme ent This equ uipment has been b tested an nd found to com mply with the limits for a Cla ass B digital de evice, pursuan nt to Part 15 of the e FCC Rules.
PAGE 5
Communications Commission ofthe U.S. Government. The exposure standard employs a unit of measurement known as the SpecificAbsorption Rate, or SAR. The SAR limit set by the FCC is 1.584 W/kg. Tests for SARare conducted using standard operating positions accepted by the FCC with theEUT transmitting at the specified power level in different channels.The FCC has granted an Equipment Authorization for this device with all reportedSAR levels evaluated as in compliance with the FCC RF exposure guidelines.
PAGE 6
avoided. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance are strictly prohibited for use with this device. Le present emetteur radio a eteapprouve par Industrie Canada pour fonctionner avec les types d'antenneenumeres ci‐dessous et ayant un gain admissible maximal et l'impedancerequise pour chaque type d'antenne.